pmb

Forum Replies Created

Viewing 15 posts - 241 through 255 (of 472 total)
1 2 3 … 16 17 18 … 30 31 32
  • Author
    Posts
  • November 16, 2012 at 8:29 am in reply to: Bosch WM not starting #384777
    pmb
    Participant

    Re: Bosch WM not starting

    They don’t have the instruction book.
    Home helps use the machine so it’s hard to know what programme was used.
    It does beep when button pressed after a few seconds but key symbol stays on.
    I will go back and try every programme.

    November 15, 2012 at 4:44 pm in reply to: Bosch WM not starting #384774
    pmb
    Participant

    Re: Bosch WM not starting

    I went back today.
    Forth button with clock symbol did not work.
    I have run out of ideas. 😥

    November 15, 2012 at 8:13 am in reply to: Bosch WM not starting #384771
    pmb
    Participant

    Re: Bosch WM not starting

    I checked brushes and heater, put a new door lock in.
    I think child lock turns on and off by holding start button for severel seconds. Still the same.
    Might go back and check board connections

    November 1, 2012 at 8:26 am in reply to: Blomberg 1301abb hinge #383831
    pmb
    Participant

    Re: Blomberg 1301abb hinge

    Hi has no one got a part number or a contact? i would really appreciate it 🙂
    Thanks Peter

    October 30, 2012 at 5:15 pm in reply to: Indesit Thermistor W/D #383824
    pmb
    Participant

    Re: Indesit Thermistor W/D

    Thanks for that
    Have put a wash heater Thermister in,to get it working. Out of stock with Connect

    September 25, 2012 at 4:43 pm in reply to: Greedy Whirlpool prices #381564
    pmb
    Participant

    Re: Greedy Whirlpool prices

    Just got a price for a Smeg washing machine Module, It’s more expensive trade from
    Connect and Masterpart Then Smeg price to the public.
    Does this mean we always have to check manafactur prices.

    August 30, 2012 at 10:40 am in reply to: INDESIT PWE8168S F06 #380322
    pmb
    Participant

    Re: INDESIT PWE8168S F06

    I spoke to soon It didn’t work, Any Indesit engineers out who can help

    August 29, 2012 at 4:17 pm in reply to: INDESIT PWE8168S F06 #380321
    pmb
    Participant

    Re: INDESIT PWE8168S F06

    I think I just found the answer on the topics section of tech.
    Its explains how to reset pressure switch,
    Its not anything I would have worked out myself.
    So everyone read it before you come across it

    August 17, 2012 at 1:14 pm in reply to: connect orders before 2.45 #379537
    pmb
    Participant

    Re: connect orders before 2.45

    On line order.
    Strange they could check time order sent and go by that.

    May 26, 2012 at 4:50 pm in reply to: Hotpoint BFV620X dishwasher #375427
    pmb
    Participant

    Hotpoint dishwasher filters blocked

    :haier: anyone please i would love to sort this one out as it is a really nice customer that can’t afford to replace it. What causes the filters blocked error? i can try to eliminate the causes.
    Thanks Peter 🙂

    May 25, 2012 at 3:26 pm in reply to: Siemens SE25M570GB/17 Dishwasher #375370
    pmb
    Participant

    Re: Siemens SE25M570GB/17 Dishwasher

    Thanks Martin I will give that a go next time 😳

    May 25, 2012 at 8:05 am in reply to: Hotpoint BFV620X dishwasher #375426
    pmb
    Participant

    Re: Hotpoint BFV620X dishwasher

    🙂 has anyone got any ideas? the filters blocked fault code i assume is the sump filters? do the pressure switches play up on these?

    May 24, 2012 at 8:05 pm in reply to: Siemens SE25M570GB/17 Dishwasher #375368
    pmb
    Participant

    Re: Siemens SE25M570GB/17 Dishwasher

    Hi no you need to take off both side panels, door panel, kick plate and panel behind. Then lay machine on back and remove base to replace heater assembly. It is a fiddly job first time but gets easier with practice good luck 🙂

    May 17, 2012 at 7:05 am in reply to: Hoover VHD8142 not spining #375000
    pmb
    Participant

    Re: Hoover VHD8142 not spining

    Thanks, Went back and checked Tacho magnet and wiring,all OK.
    They have decided to get a new machine.

    April 26, 2012 at 7:19 am in reply to: AEG L63742 wm #373762
    pmb
    Participant

    Re: AEG L63742 wm

    Thanks mike i couldn’t see any visual marks on it or its connections but i will be listening closely when i go back 🙂

  • Author
    Posts
Viewing 15 posts - 241 through 255 (of 472 total)
1 2 3 … 16 17 18 … 30 31 32