Forum Replies Created
-
Posts
-
Re: belling ceramic hob xou 388
m, yes new ones are ECO. i’ve looked on the link shown above for diamond but can’t find conversion info. will e-mail them tomorrow.
richardRe: hotpoint bwm 12r
customer has found sale receipt, hotpoint engineer is booked to fix soon. case closed. if i get info from cust i will post to advise on the service she got etc.
richardRe: Made me think.
skimming…has anyone , including the banks and other financial providers got any ideas or suggestions as to how to minimise this theft. from the above cases it doesn’t seem to matter haw vigilant you are some piece of s@@t will try to rob you of your hard and legally earned cash. i’ve read all the stuff about keeping your card secure and be vigilant, what else can we do?
richardRe: Blank Off The Hot To Avoid This Tragedy !!
graham, a very good warning given the supply of cold fill only machines. to be honest i am guilty in the past of not blanking off the hot water but recently i have always made sure it is blanked off. particularly if the hot supply is under the sink, a careless moment when the customer is stuffing things on the self can easily knock the supply on, also if there are children in the house and the supply is easily acssesible their little fingers can turn the supply on. for the cost of a blanker it’s peace of mind for me and more importantly the customer.
richardRe: WHITE KNIGHT C/D MODEL 767C
greame, thanks for tip…hairdryer did the trick. fan off now ready for the 1000screws.
will run new pump before fitting
richardRe: WHITE KNIGHT C/D MODEL 767C
graeme, thanks will wait till wife goes to work and get the hair dryer. will i need to refit the front to give the bag of s### some regitity? 8)
richardRe: decisions decisions
thanks to all the above, i feel as a one man band, plus backing singer i’m doing ok…i repair machines but when i get to a BER i offer to supply a replacement. customers like this service..i promise to deliver, instal and test, in house run through of facilities and take the old one away ( machine i mean), not the partner. customers like this very much. too often i’ve heard, customers saying…can’t bear to go to cu..ys, co..et etc as they are full of glib gits who only want to sell the appliance which will get them points or bonus and then sell the extended warranty. if there are any other guys who don’t offer a replacement…try it. it does work! 😀
as of now i think i’ll stay put! 8)
richardRe: hotpoint wd420g
steve..thanks , i’m waiting for the customer to decide what to do…i think that having been on the receiving end of the hotpoint customer care programme he wont be buying another hotpoint 😉
richardRe: Another joke.
in a care home there was an old couple who decided to get married, however the old lady said, i’ll marry you on three conditions…1) i have £100 a week to spend, thats ok said the old man….2) i want you to take me out for diner at the week end, thats ok said the man and 3) i want sex every day, thats ok two he said, put me down for fridays.
richardRe: hitatci w/d mod. fwd135w ser no. 004621
customer rang today…prog 4 still ok..i suggested she tries moving prog to rinse spin to check the motor..she rang back, all ok.. rinses twice and then fast spins ok..no trip out. beginning to look like the heater?
suggestions please
richardRe: Hotpoint WD420 stuck mid wash
get the drain hose, put it in a bucklet or bowl. lower than the bottom of the washtub. if the water trickles out there is a blockage somewhere between the sump tube off the bottom of the tub which leads to the drain pump. as a test of the drain pump itself select slow spin or drain cycle and the water should whoosh out. if it doesn’t then find the blockage by removing sump hose and work your way to the pump.
hope this helps
richardRe: Nokia Phone
great phone…try a carphonewharehouse..i’ve found my local store very helpfull and accommodating…don’t go on a saturday morning!!!!!
richardRe: WhiteKnight CL787 condensor tumble dryer belt?
rob..bitch is the word. if you can take take it to wokrkshop and then you can express you true feeling out loud. find the cause of the drum jam first.
sorry if this is too obvious 😳
richardRe: hitatci w/d mod. fwd135w ser no. 004621
customer rang today..prog 4 fine allthe way through no probs…prog 5 tripped out. suggested as the machine was family friend that if the wash results were satisfactory on prog4 they should run it until it finally dies. would i be right in thinking spares for this golden oldie are like hens teeth?
richard
