Forum Replies Created
-
Posts
-
Re: AEG Lavamat 72630 how good are they
I really am not sure which one to go for at all.
What would you do?
Re: Been given a Hoover Electronic 1100 they any good?
http://www.youtube.com/watch?v=IQGG1EUN_M4
Similar to this I think but a few more features she says.
Yes lol it is!
I am obviously supporting ISE on their appliance and trying to explain how the ISE is better all round!
I still havent bought one yet though as I have just come out of hospital after a 3 week stay after breaking my foot and having surgery so I am off work for 12 weeks on reduced pay so really need to keep a tight watch on the money at the mo.
If worst comes to worst I will just go into my savings and by the ISE10 though.
Thanks Kwatt
Ok if you look at 2 different machines then for example dont even have to be maytag or the ISE machine but any random 2
Both A rated wash and one does it in half the time of the other.
What would you say is needed in the wash program to make it wash quicker but with great results still to get that A rated wash? Speaking from your own experience in the appliance world, you guys know how these machines work etc
Not sure how to take that.
But surely you guys know this? Is it an unreasonable question to ask? I think not.
Im a customer and it would be nice to know how the wash cycle works, there are no videos on youtube and I have searched lots.
Is the tumbling action fast paced.
Re: ISE10, rinsing, quality, reliability and cost of repairs
How are you finding the ISE10 I see you have had it since May?
Re: ISE10 or Maytag MAF9501AEW
I would also like to know the answer to this, is the wash more vigorous and drum speed faster to complete the wash time quicker?
Does it tumble more times each way with shorter pauses between each tumble
Please can someone answer this question as inside the drum looks identical to the maytag also and the paddles are the same.
I am this close to buying the ISE10 just theres these questions that I need to ask for my own interest so I can build up the picture inside my head of why the ISE10 is the better choice etc.
The aftercare support is top notch I know but some people like to know whats going on inside also to say the ISE10 washes better than the maytag equivalent.
Im in leeds area and Penguin I know your the supplier as I spoke to your very friendly and helpful lady on the telephone today when enquiring prices etc.
Any information greatly appreciated.
Re: ISE 10/Maytag – is it the same machine?
I would also like to know the answer to this, is the wash more vigorous and drum speed faster to complete the wash time quicker?
Does it tumble more times each way with shorter pauses between each tumble
Please can someone answer this question as inside the drum looks identical to the maytag also and the paddles are the same.
I am this close to buying the ISE10 just theres these questions that I need to ask for my own interest so I can build up the picture inside my head of why the ISE10 is the better choice etc.
The aftercare support is top notch I know but some people like to know whats going on inside also to say the ISE10 washes better than the maytag equivalent.
Re: how long before the bearings give up the ghost alltogeth
Thanks for the info guys, the drum has been increasing getting louder over the last yr however you dont notice it slowly over time is increasing in loudness.
When rotating the drum by hand it feels lumpy and only now has this started happening the last month or so.
Will putting it on a slower spin stretch it to last a little longer as I need to save up for the ISE10 machine you see.
I am not sure how much it will cost to get it repaired but as you know yourselves with a machine that is this old what will break on it next?
Re: ISE10 Washer – Door does not lock
joe70 wrote:Hi there,
it’s happening again. In fact it has happened for the last 2 weeks: the door does not lock, I pull the red cord, it works for 2-3 washings, and then it does not lock again. This seems to be our Sunday afternoon routine.:(
My main worry is that, as Kwatt stated, it is a “very rare issue” that is not going away in my machine. So … what do we do? Does it need to be repaired or does the machine need to be replaced?
If I am honest I am quite disappointed with this door business: we did buy this machine for peace of mind, but so far …
Don’t get me wrong: the machine is fine: it performs as well as it looks, but the door is getting on our nerves and my missus is starting to lack the judgment of my investment (or, as she puts it “investment”).
Can you advice please?
thanks
joe
On my friends maytag which looks identical to the ise10 the door operates the same way and if he doesnt close the door hard enough he gets the same issue, it happens because if you dont use enough force it will continue to do it.
You have to give them a bit of a slam for them to shut.
Re: ISE 10/Maytag – is it the same machine?
Ok I understand! Great piece of kit!
IM tied up between the ISE10 and the other model though, I live one other adult do about 5 washes per week.
Its prob worth spending the extra couple of hundred and getting the ISE10.
I would like to ask though how it does a wash in 60minutes without tilting the drum and also if the design is the same as the maytag pretty much albeit better components that it beats the wash time of the maytag, is the drum tumble faster when in the wash cycle so more vigorous?
What is different inside it as looking at the maytag page, the suspension is the same, the motor is also brushless. SO that covers the moving parts.
See link
http://maytag.co.uk/ProductPages/60Wet.aspx
I know you get a 10 yr warranty with the ISE but what is actually different.
A lot of manufacturers use someone elses product with their own name on.
Im asking what exactly are the different parts inside?
Re: ISE 10/Maytag – is it the same machine?
I thought they both used the same drive system as the maytag has the suspension system and the drum is mounted to the door the same way.
They also use brushless motors from what I can tell. One thing I do notice is the programming the ISE 10 seems to complete a wash in 60minutes there abouts but the Maytag whilst looking the same and having the same drum seems to take 1:50minutes?
So whats been done to the programming? Does it tumble more and faster to get the clothes moving about the drum with more force?
