robbra

Forum Replies Created

Viewing 15 posts - 256 through 270 (of 1,090 total)
1 2 3 … 17 18 19 … 71 72 73
  • Author
    Posts
  • March 8, 2011 at 7:10 am in reply to: Seriously….no buyer is this stupid!!!!! #346232
    robbra
    Participant

    Re: Seriously….no buyer is this stupid!!!!!

    I’ve put it on my watch list 😳

    March 8, 2011 at 7:03 am in reply to: Bosch SRS45E38GB/01 Dishwasher #344071
    robbra
    Participant

    Re: Bosch SRS45E38GB/01 Dishwasher

    Yes Mike, being an expert now having done my first one 😛 I can see no way to change the motor or seal on this without the tank off on this model.
    I think PINKY is having a giraffe unless he can tell me how.
    Come on PINKY explain 😆
    Rob

    March 7, 2011 at 6:22 pm in reply to: Bosch SRS45E38GB/01 Dishwasher #344068
    robbra
    Participant

    Re: Bosch SRS45E38GB/01 Dishwasher

    This has as much room around it as a train in a tunnel.
    Ah well, live and learn.

    March 7, 2011 at 3:57 pm in reply to: Bosch SRS45E38GB/01 Dishwasher #344066
    robbra
    Participant

    Re: Bosch SRS45E38GB/01 Dishwasher

    Well, I took the thing apart, renewed the seal kit and put it back together and now water pours out of the seal that the impeller housing fits into. It is very loose so it might have been that all along 😳 But why would it get so bad? Vibration of the motor?
    Ordered and on its way.
    The first time I’ve taken one of these apart and thanks again to Martin for the instructions. Not as scary as I thought.
    Rob

    March 7, 2011 at 3:49 pm in reply to: Bad Beko motors #346398
    robbra
    Participant

    Re: Bad Beko motors

    .very poor quality , but remember this is the same machine you cant renew paddles as well – new tub unit if paddles come off ..

    Hi Ally,
    is it the same on a WM7127W?
    Got one to go to tomorrow with the paddles off.
    Rob

    March 2, 2011 at 7:56 am in reply to: Hoover Dishwasher #345596
    robbra
    Participant

    Re: Hoover Dishwasher

    Anyone got an opinion on the water softener?
    Rob

    February 25, 2011 at 6:00 pm in reply to: Hoover Dishwasher #345595
    robbra
    Participant

    Re: Hoover Dishwasher

    Thanks loopey.
    Any idea which, red hose or clear?
    Two other points after another look.
    Heater seems to be o/c but will check again…would this cause this?
    Water coming into the tub is salty and when it tries to cycle bubbles come from the hole in the bottom of the sump so could the water softener be faulty?
    Rob

    February 24, 2011 at 8:13 pm in reply to: Hotpoint/Bosch crossover element (dishwasher) #345525
    robbra
    Participant

    Re: Hotpoint/Bosch crossover element (dishwasher)

    I’ve looked on Qualtex and Connect and they look the same. having now visited I can see it’s the equivalent of the Hotpoint model so ordered it.
    Cheers Jim

    February 21, 2011 at 4:50 pm in reply to: Siemens WXL166AGB/01 Front loader #345283
    robbra
    Participant

    Re: Siemens WXL166AGB/01 Front loader

    No probs with the flood device so will check the heater.
    Ta

    February 21, 2011 at 4:40 pm in reply to: Siemens WXL166AGB/01 Front loader #345281
    robbra
    Participant

    Re: Siemens WXL166AGB/01 Front loader

    Never thought of that Martin.
    If not then the chances of it being the pcb??? or could the pressure switch be at fault? although it did click just the once.
    Rob

    February 19, 2011 at 11:33 am in reply to: You just can’t turn your back! #344923
    robbra
    Participant

    Re: You just can’t turn your back!

    A1TEC wrote:

    funkyboogy wrote:
    was the sign on the van

    my big fat &&&& scrap wagon ..

    lol ally

    Thought those vans were just plain white with a dog in the passengers seat. 😉

    John.

    OI!!!
    leave me out of it 😳

    February 18, 2011 at 3:07 pm in reply to: Servis 6036 Door lock #344107
    robbra
    Participant

    Re: Servis 6036 Door lock

    Simps.
    If you still need it I’m sure I’ve got one in the loft.
    Let me know
    Rob

    February 17, 2011 at 7:22 am in reply to: SAMSUNG B1215 Washing Machine #344915
    robbra
    Participant

    Re: SAMSUNG B1215 Washing Machine

    8 mins mean it doesn’t think it has drained so check pressure pot/hose etc.

    February 16, 2011 at 4:34 pm in reply to: Hotpoint FFA61 #344739
    robbra
    Participant

    Re: Hotpoint FFA61

    Tubs wrote:Can always use an old piece of fridge stat capillary tube bent into shape of ‘Shepards hook’ couple of inches or so. Hook part over deforst heater and poke rest into centre of hole.

    Should conduct enough heat to stop drain hole freezing.

    Steve

    That seems like a very good tip 8)
    I’ll have to remember that

    February 15, 2011 at 6:07 pm in reply to: Maintenence Direct Hayes #344723
    robbra
    Participant

    Re: Maintenence Direct Hayes

    Hi Dr Dill,
    I’ve been with them for about 4 years, not a lot of work but fairly good rates and pay quickly into bank account. Can be sticky on part prices and may ask for a copy of your suppliers invoice but it hasn’t happened to me but I don’t take the micky.
    Rob

  • Author
    Posts
Viewing 15 posts - 256 through 270 (of 1,090 total)
1 2 3 … 17 18 19 … 71 72 73