robbra

Forum Replies Created

Viewing 15 posts - 46 through 60 (of 1,090 total)
1 2 3 4 5 … 71 72 73
  • Author
    Posts
  • May 22, 2014 at 6:22 pm in reply to: Bosch Auto WAA24171 Flashing Rinse Light… #371372
    robbra
    Participant

    Re: Bosch Auto WAA24171 Flashing Rinse Light…

    Hi Martin,
    forgot to say I did check the motor and all on, hope it isn’t the board

    May 22, 2014 at 5:51 pm in reply to: Bosch Auto WAA24171 Flashing Rinse Light… #371370
    robbra
    Participant

    Re: Bosch Auto WAA24171 Flashing Rinse Light…

    I’ve got the same problem but the reset hasn’t worked, changed pump, then brushes and still rinse light flashes.
    Any more pointers as to what to check next?
    Thanks
    Rob

    May 12, 2014 at 1:52 pm in reply to: Customer threatening to blacken my business on FB #413567
    robbra
    Participant

    Re: Customer threatening to blacken my business on FB

    8) I’d ditch Facebook myself, not that I’m on it anyway.

    April 8, 2014 at 3:53 pm in reply to: Old people friendly washing machine #411043
    robbra
    Participant

    Re: Old people friendly washing machine

    No mention of
    Amica AWB510L.
    2 year guarantee, you get any repairs and a good priced reliable machine…..and the door is a doddle to open. Buy from Swift.
    Sold lots and only one customer had a problem but she comes from a family of appliance wreckers.
    Rob

    April 5, 2014 at 5:06 pm in reply to: Scratters Charter? #412086
    robbra
    Participant

    Re: Scratters Charter?

    They can still take other goods to the value so what’s the problem?

    March 5, 2014 at 6:42 am in reply to: Sansung RL37LGSW F/Freezer #409743
    robbra
    Participant

    Re: Sansung RL37LGSW F/Freezer

    Thanks again Bob.
    Fan is ok so back I go.
    Rob

    March 4, 2014 at 4:24 pm in reply to: Sansung RL37LGSW F/Freezer #409741
    robbra
    Participant

    Re: Sansung RL37LGSW F/Freezer

    Hi Bob,
    Sorry to come back on this again.
    Changed the thermal fuse but she says it’s not cooling the fridge again.
    There is a sensor on the bottom of the evaporator (yellow and red plug with 2 purple wires) that’s o/c. can you say whether it needs changing.Connect have no idea, even of a part number. Becoming a bit of a saga.
    Thanks again
    Rob

    February 26, 2014 at 11:33 am in reply to: Sansung RL37LGSW F/Freezer #409740
    robbra
    Participant

    Re: Sansung RL37LGSW F/Freezer

    Thanks Bob, yep,thermal fuse o/c.
    Thanks for your help, not done a Samsung before so really appreciate the onfo.
    Rob

    February 25, 2014 at 7:55 am in reply to: Sansung RL37LGSW F/Freezer #409738
    robbra
    Participant

    Re: Sansung RL37LGSW F/Freezer

    Thanks Bob,
    Going to be a bit thick here.
    Two temp sensors listed on connect and don’t know what is the difference
    Temp sensor evap 5045176391137
    Temp sensor fre 5045176391120
    Sorry to be a pain
    Rob

    February 24, 2014 at 8:55 am in reply to: Sansung RL37LGSW F/Freezer #409736
    robbra
    Participant

    Re: Sansung RL37LGSW F/Freezer

    Hello again,
    It has happened again and going back tomorrow. Any more things to try before I give her a refund?
    Rob

    February 18, 2014 at 4:04 pm in reply to: Sansung RL37LGSW F/Freezer #409735
    robbra
    Participant

    Re: Sansung RL37LGSW F/Freezer

    Hi Bryan,
    Went back but knew both ducts were clear as I’d steamed then before.
    There was quite a build up of ice again on the evaporator.
    Am I right that when it is plugged in again the test procedure should start?
    On this the fan cones on after about 20 secs with the compressor.There is no power to the defrost heater, which is fine, during this start up. I thought the heater came on first.
    As you can tell this has thrown me so any help begged 😕
    Rob

    February 14, 2014 at 7:17 am in reply to: Viceroy dishwasher #409458
    robbra
    Participant

    Re: Viceroy dishwasher

    eastlmark wrote:

    expertcat wrote:
    That’s all I’m seeing on vestel dishwashers occasional pcb blocked drain pump but mostly wiring loom failures

    not surprising given the razor sharp edges….don’t they ever learn?

    Do they ever care? 8)

    February 3, 2014 at 3:21 pm in reply to: Hotpoint 9326W T/Dryer #408736
    robbra
    Participant

    Re: Hotpoint 9326W T/Dryer

    Thanks Jim
    Rob

    January 30, 2014 at 7:26 am in reply to: Diamond H #408626
    robbra
    Participant

    Re: Diamond H

    Thanks Martin,
    I couldn’t find anything much, another bit of our manufacturing bites the dust.

    January 28, 2014 at 1:33 pm in reply to: Is it a little quiet out there #407962
    robbra
    Participant

    Re: Is it a little quiet out there

    Dead down here, just as tax has to be paid, sales are keeping me going at the moment.
    Rob

  • Author
    Posts
Viewing 15 posts - 46 through 60 (of 1,090 total)
1 2 3 4 5 … 71 72 73