robbra

Forum Replies Created

Viewing 15 posts - 796 through 810 (of 1,090 total)
1 2 3 … 53 54 55 … 71 72 73
  • Author
    Posts
  • October 14, 2008 at 3:09 pm in reply to: Servis M6505S #265135
    robbra
    Participant

    Re: Servis M6505S

    Hi John,
    Had one today the same and found the no spin button stuck in. Took off the board and released it and “Bobs your uncle”…apparantly. But as Tim says the board also means no light s on the facia.
    Rob

    October 8, 2008 at 9:27 pm in reply to: EMW, 6 MONTHS,NOW NOT 12? #263131
    robbra
    Participant

    Re: EMW, 6 MONTHS,NOW NOT 12?

    Tony,
    is this guarantee at 6 months for all boards or just “rubbish ones”?
    Thanks
    Rob

    October 7, 2008 at 7:25 am in reply to: I’m stuck #264415
    robbra
    Participant

    Re: I’m stuck

    Thanks Seamy,
    It started with a blocked pressure chamber and it is slow to fill but does eventually.
    Will check this out.
    Thanks again,
    Rob

    September 27, 2008 at 9:48 am in reply to: What would you do? #263471
    robbra
    Participant

    Re: What would you do?

    I agree Martin. Me too. Often if you give an experienced answer someone will contradict you anyway.
    As I started this thread I will say that I have a call now from the customer to ask me to call to his neighbours washer so there are always two ways to view this. Think I will still advise on checking filter etc. but that’s me.
    Rob
    Thanks for the input

    September 25, 2008 at 5:42 pm in reply to: Beko WMA 610S rinse light on #263412
    robbra
    Participant

    Re: Beko WMA 610S rinse light on

    I’ve had them on Beko to do many strange things like stopping the programme at a point and not allowing a reset, just pumping or setting prog,doing one tumble and lights all flashing. The one last week had great continuity in situ but were down to the minimum and only 2 years old.
    Rob

    September 25, 2008 at 1:55 pm in reply to: Beko WMA 610S rinse light on #263410
    robbra
    Participant

    Re: Beko WMA 610S rinse light on

    Have you checked the brushes?
    Had one last week. In situ perfect circuit but were worn right down.
    Rob

    September 23, 2008 at 3:29 pm in reply to: The Twin Tub is not dead #263247
    robbra
    Participant

    Re: The Twin Tub is not dead

    AHHHHH!!!!
    Just seen the warranty is …RETURN TO BASE…great for the pensioner who has been ripped off with the price in the first place.
    Rob
    IMHO of course

    September 23, 2008 at 3:26 pm in reply to: The Twin Tub is not dead #263246
    robbra
    Participant

    Re: The Twin Tub is not dead

    AHHHHH!
    the XPB-68 has…wait for it….
    free delivery, free casters?????? and free 3 yr warranty
    seems like a bargain :rolls:
    Rob

    September 17, 2008 at 6:39 am in reply to: Indesit part no #262331
    robbra
    Participant

    Re: Indesit part no

    Thanks Mike,
    Think it may go to BER.
    Rob

    September 15, 2008 at 1:15 pm in reply to: Indesit part no #262329
    robbra
    Participant

    Re: Indesit part no

    please, Can anyone tell me where I can get this motor and how much?
    Thanks
    Rob

    September 12, 2008 at 7:58 am in reply to: Indesit part no #262328
    robbra
    Participant

    Re: Indesit part no

    Anyone know where I can get one and how much?
    Connect and others are out of stock.
    Thanks
    Rob

    September 11, 2008 at 4:08 pm in reply to: Indesit part no #262327
    robbra
    Participant

    Re: Indesit part no

    Thanks Jim!

    September 8, 2008 at 5:24 pm in reply to: Servis M6500s #262015
    robbra
    Participant

    Re: Servis M6500s

    I would vote for the module…had quite a few like this. Janus so you would need the kit to programme unless you had it from EMW.
    As ever the serial no. is very helpful on Servis m/c
    Rob

    September 4, 2008 at 2:25 pm in reply to: VELO – AC2000 #261625
    robbra
    Participant

    Re: VELO – AC2000

    Imported by Norfrost some time ago and parts from Qualtex. Not chinese but Dutch
    Rob

    September 3, 2008 at 10:15 am in reply to: servis M6006 keeps on filling #261368
    robbra
    Participant

    Re: servis M6006 keeps on filling

    Just a thought,
    That module pictured is not the right one for a M6002.
    Should be either
    546089200 or
    546087500 depending on date of manufacture
    so that won’t fit whatever the price.
    Same for the M6006
    546089200 or
    546098900
    Serial number would give correct part
    Rob

  • Author
    Posts
Viewing 15 posts - 796 through 810 (of 1,090 total)
1 2 3 … 53 54 55 … 71 72 73