robbra

Forum Replies Created

Viewing 15 posts - 811 through 825 (of 1,090 total)
  • Author
    Posts
  • in reply to: servis M6006 keeps on filling #261358
    robbra
    Participant

    Re: servis M6006 keeps on filling

    Hi,
    try resetting the programme knob to stop for 10 seconds with power on as the module can remember parts of previous programmes, or check pressure pots for blockage or failing that would be module. Have cleared this fault a few times by just resetting programmer knob.
    Rob

    in reply to: two faults ..samsung wfj145n and servis 491 w c #260356
    robbra
    Participant

    Re: two faults ..samsung wfj145n and servis 491 w c

    Because the pressure switch doesn’t register as full with the damaged p/sw hose the pcb automatically starts pump as it thinks the machine is leaking. Hence 4E code
    Rob

    in reply to: two faults ..samsung wfj145n and servis 491 w c #260351
    robbra
    Participant

    Re: two faults ..samsung wfj145n and servis 491 w c

    Richard,
    The Samsung automatically has a 2 yr guarantee.
    4E is “water leak”…there was a problem with pressure hose cracking at the top or bottom.
    New part no DC62-10311A
    Rob

    in reply to: Whats the most annoying thing customers do? #107572
    robbra
    Participant

    Re: Whats the most annoying thing customers do?

    Diplomat(whirlpool) d/washer..F7. Can’t cure the fault, he is on the computer to a forum ( not UKW) getting suggestions as to what it is. Try this, try that,
    and the other, are you sure it’s the flowmeter.Well yes..P45 told me so it has to be right!!!!. Tried cleaning contacts to no avail. How much about £80 for the part. He disappears again, comes back and it’s only £65 on Whirlpool website. I had had enough by now, packed my tools and as I was going he said would I go back and fit it :rolls: I say no as you don’t trust me enough to get it right so sort yourself out 😈
    Think he is stuck now as nobody does dishwashers where he lives. Do I care?????
    Rob

    in reply to: Diplomat ADP8332 Dishwasher #260087
    robbra
    Participant

    Re: Diplomat ADP8332 Dishwasher

    Thanks Chris,
    Never come across one before. 😳
    Rob

    in reply to: Pattern Heaters: A cautionary tale :( #209507
    robbra
    Participant

    Re: Pattern Heaters: A cautionary tale 🙁

    Thanks Martin,
    That’s what I was wondering. Geoff must have read my mind ‘cos I didn’t make it clear.
    Don’t think I will be fitting pattern elements to Bosch again.
    Rob

    in reply to: Pattern Heaters: A cautionary tale :( #209502
    robbra
    Participant

    Re: Pattern Heaters: A cautionary tale 🙁

    Martin,
    Did you get any joy on this one?
    Rob

    in reply to: servis m2007bl #259652
    robbra
    Participant

    Re: servis m2007bl

    Hi,
    Changed no end of the relay on/off switch and had this several times but is power getting to the motor? Could be a break in the wiring.
    Rob

    in reply to: Beko WMA 510 Auto #259787
    robbra
    Participant

    Re: Beko WMA 510 Auto

    Syphoning?????
    Rob

    in reply to: Servis M6504w #259700
    robbra
    Participant

    Re: Servis M6504w

    Yes Mike,
    Lasts a lot longer than a new button pad and saves a callback.
    Rob

    in reply to: Cowboys still riding the range #259809
    robbra
    Participant

    Re: Cowboys still riding the range

    Foremost Generated Power I reckon!!!!
    £79 to unblock hose under Servis soap drawer.
    £75 to unblock Hotpoint filter
    both of which I had to go to the following week and do properly…and have you noticed the new vans????
    I could have a Roller on those charges.
    Rob

    in reply to: Cancellation of Contracts, new regulations! #258605
    robbra
    Participant

    Re: Cancellation of Contracts, new regulations!

    Just do what the French do…..ignore it. How many people would this involve? Probably none and I certainly won’t lose any sleep worrying about it.
    Rob

    in reply to: Servis M0330W FF #257754
    robbra
    Participant

    Re: Servis M0330W FF

    Fan shouldn’t run if the fridge door is open and not start for about 20 mins after turn on. They had to redesign the module on this so a serial no would be helpful.
    Rob

    in reply to: Teka Wm1400FS #257474
    robbra
    Participant

    Re: Teka Wm1400FS

    You can buy direct from Teka on….01235 861916
    Rob

    in reply to: Beko WMA665W not washing #256199
    robbra
    Participant

    Re: Beko WMA665W not washing

    I was lost on one like this with the same lights showing and it was the heater. Strange because one minute it meggered ok then after a test was o/c.
    Rob

Viewing 15 posts - 811 through 825 (of 1,090 total)