robbra

Forum Replies Created

Viewing 15 posts - 826 through 840 (of 1,090 total)
1 2 3 … 55 56 57 … 71 72 73
  • Author
    Posts
  • July 3, 2008 at 6:44 am in reply to: Rising fuel costs #256405
    robbra
    Participant

    Re: Rising fuel costs

    Don,
    Google diesel tuning box uk and look on there. Only works on commom rail diesel in most in most cases so thats mine out of it. Some start at £150.
    Or look at itv.com/tonight
    Rob

    July 3, 2008 at 6:37 am in reply to: Bosch WFD2072GB/05 #256508
    robbra
    Participant

    Re: Bosch WFD2072GB/05

    Thanks lads,
    Not sure I’ll live long enough to do all that lot, and customer definitely won’t pay for it so looks like a BER.
    Rob

    July 2, 2008 at 1:54 pm in reply to: Servis M6725S Door seal #256483
    robbra
    Participant

    Re: Servis M6725S Door seal

    You’re welcome

    July 2, 2008 at 12:38 pm in reply to: powder draw #256446
    robbra
    Participant

    Re: powder draw

    Normally won’t budge even with a hammer & chisel. I haven’t bothered to try for 25 years.
    Rob

    July 2, 2008 at 12:36 pm in reply to: Servis M6725S Door seal #256481
    robbra
    Participant

    Re: Servis M6725S Door seal

    404002500 is the magic no. Not sure if it’s available other than GBDars.
    You will find all Servis door seals have a number moulded on them.
    Rob

    June 30, 2008 at 3:15 pm in reply to: Thorny Issue No2 #256247
    robbra
    Participant

    Re: Thorny Issue No2

    In the late eighties, Servis, the good old English manufacturer, not that mob now, introduced a variant on the Quartz where the customer chose the temp, wash type, spin and the machine did the rest. A total flop as everyone wanted 520 programmes, and loads of buttons. But in saying that the Quartz was a doddle and sold well and was mostly reliable once they sorted the bearing seal in 1984.and the spincare tub, and the noisy GEC motors and the door seal and ………
    But I’ve just reired mine after 18 years without a repair except the facia when it fell down stairs.
    If only….

    June 16, 2008 at 2:52 pm in reply to: ISE #255043
    robbra
    Participant

    Re: ISE

    Thanks Ken,
    Message on the way to John.
    Rob

    June 16, 2008 at 2:32 pm in reply to: teka w/d #255026
    robbra
    Participant

    Re: teka w/d

    Hi,
    It could be either a Candy, Servis or Electrolux. These are the ones I have come across branded Teka recently plus they have a 2 yr guarantee.
    Rob

    June 12, 2008 at 3:19 pm in reply to: Plastic guarantees? #254471
    robbra
    Participant

    Re: Plastic guarantees?

    One other thing to look at…
    Loosen the screws holding the door onto the hinge, lift the door and tighten. Often the door drops and makes it harder to close and open. I do this on all Servis, even brand new and never go back for a handle.
    Rob

    June 4, 2008 at 4:41 pm in reply to: Whirlpool AWM9000-wm110 #253610
    robbra
    Participant

    Re: Whirlpool AWM9000-wm110

    Thanks Chris,
    Went back today and F11 disappeared so maybe it was wet from the leak and dried out. So just a door seal to get. Phew
    Rob

    May 30, 2008 at 3:16 pm in reply to: Hotpoint 9934 #253083
    robbra
    Participant

    Re: Hotpoint 9934

    Thanks lads,
    She decided that a new Zan washer/drier was a better bet. We shall wait and see.
    Rob

    May 16, 2008 at 5:01 pm in reply to: BEKO1715S #252289
    robbra
    Participant

    Re: BEKO1715S

    Just sent EMW some old boards so they are now repairng them.
    Worth a try.
    Rob

    May 11, 2008 at 8:55 am in reply to: Unusual request #251722
    robbra
    Participant

    Re: Unusual request

    Hi,
    Let me get this straight. The tenant asks you to double the invoice..Does he pay you double or is he after a profit for himself? If he is not paying you double then you will be paying tax on double what you receive. What a muddle. I think I would do as you did and charge the right amount and tell whomsoever that you work firstly for yourself and will only work to your own standards and not do the dirty work for anyone elses gripes.
    Just my to penn’orth.
    Rob

    April 27, 2008 at 10:05 am in reply to: New tool for dealing with water escapage #250501
    robbra
    Participant

    Re: New tool for dealing with water escapage

    Hi Andy,
    Are they reuseable or just one shot and what do they cost?
    Rob

    April 27, 2008 at 9:39 am in reply to: Ignore list #250446
    robbra
    Participant

    Re: Ignore list

    Hi kiddo,
    No idea how it happened but will be keeping an eye on your posts today 😆
    Rob

  • Author
    Posts
Viewing 15 posts - 826 through 840 (of 1,090 total)
1 2 3 … 55 56 57 … 71 72 73