rocker

Forum Replies Created

Viewing 15 posts - 856 through 870 (of 1,132 total)
1 2 3 … 57 58 59 … 74 75 76
  • Author
    Posts
  • March 13, 2009 at 9:02 am in reply to: Diplomat ADP5330 range cooker #280077
    rocker
    Participant

    Re: Diplomat ADP5330 range cooker

    Thanks for your help gents.
    Dave have pm you, will I need to disconnect gas parts to gain access to cooling fan. Not gas trained.

    March 10, 2009 at 8:36 pm in reply to: Zanussi TC7103S Pro. 916092529-02 #279768
    rocker
    Participant

    Re: Zanussi TC7103S Pro. 916092529-02

    Cheers Merv, thanks for your advice will check that stat out.

    Andy have sent you my e-mail address.

    Thanks John

    March 9, 2009 at 7:47 am in reply to: John lewis WD1408 #279646
    rocker
    Participant

    Re: John lewis WD1408

    Cheers Chris. John

    March 6, 2009 at 9:24 am in reply to: Siemens SE65T370GB/02 #279203
    rocker
    Participant

    Re: Siemens SE65T370GB/02

    Martin. spot on. I removed and cleaned side tank and transfer pipe some slight gung found. works fine now.
    cheers john.

    March 4, 2009 at 10:12 pm in reply to: Siemens SE65T370GB/02 #279202
    rocker
    Participant

    Re: Siemens SE65T370GB/02

    Cheers Martin, I didn’t check these parts , as I explained all appeared to be working ok so dismissed, but will recall and check.
    Cheers john.

    March 3, 2009 at 4:08 pm in reply to: AEG Lavamat 971 Door release. #279039
    rocker
    Participant

    Re: AEG Lavamat 971 Door release.

    Sure there is a manual release lever, if you open the flap to drain filter. pull down. if that dosent release door, Interlock / release mech possible faulty, if ok you need to check voltage into solonide then work backwards to supply. hope this helps
    John

    February 28, 2009 at 8:39 pm in reply to: Whirlpool DWHB10 ( Dishwasher) #278805
    rocker
    Participant

    Re: Whirlpool DWHB10 ( Dishwasher)

    Cheers Chris

    February 14, 2009 at 12:38 pm in reply to: Servis M9310W #277336
    rocker
    Participant

    Re: Servis M9310W

    Timdowing, thanks for advice. john

    February 10, 2009 at 8:14 am in reply to: Indesit D41 #276735
    rocker
    Participant

    Re: Indesit D41

    Timdowning, you were spot on, circulating motor-jammed released now running ok.
    Cheers John.

    February 8, 2009 at 8:45 pm in reply to: Indesit D41 #276734
    rocker
    Participant

    Re: Indesit D41

    Thanks timdowning for your help, will check this out. John

    February 7, 2009 at 6:35 pm in reply to: AEG D/W (Pnc 911 232 407 01) #276474
    rocker
    Participant

    Re: AEG D/W (Pnc 911 232 407 01)

    Thanks to you both for your advice, will look into these thanks John.

    February 5, 2009 at 5:07 pm in reply to: White Westinghouse 05-203105 Oven #276292
    rocker
    Participant

    Re: White Westinghouse 05-203105 Oven

    Thanks Andy, John.

    February 4, 2009 at 9:12 pm in reply to: Diplomat APN8512 #276245
    rocker
    Participant

    Re: Diplomat APN8512

    Dave & Chris, many thanks for your help and advice, can go ahead to order part now. John

    January 20, 2009 at 10:57 pm in reply to: Zanussi WJS166SW #274697
    rocker
    Participant

    Re: Zanussi WJS166SW

    Many thanks for your help gents, I will look for a dry joint Geoff.
    John.

    January 14, 2009 at 11:39 am in reply to: Whirlpool H Duty T/Dryer #274002
    rocker
    Participant

    Re: Whirlpool H Duty T/Dryer

    Jim, called before xmas to one installed in a beauty palour, running most of the day, it also went dead, but reset after some time, (I was told on this site) that the machine isn’t designed for this extream use, possibe motor cutting out as fitted with internal toc.
    This may not apply to your job, but hope this helps.

  • Author
    Posts
Viewing 15 posts - 856 through 870 (of 1,132 total)
1 2 3 … 57 58 59 … 74 75 76