RocketMan

Forum Replies Created

Viewing 15 posts - 511 through 525 (of 657 total)
  • Author
    Posts
  • in reply to: New World CKE 13530BR double oven #304067
    RocketMan
    Participant

    Re: New World CKE 13530BR double oven

    Cheers Bazza,

    I don’t have a connect account but I know a shop that does.. I’ll get a price off Dave.

    Thanks for your help….back to painting

    in reply to: Diplomat F/F APM6855-1 Fan Motor – What’s So Special? #300454
    RocketMan
    Participant

    Re: Diplomat F/F APM6855-1 Fan Motor – What’s So Special?

    Yes they’re expensive…. only real test is to apply voltage….

    this might help..

    http://www.ukwhitegoods.co.uk/modules.p … ht=apm6855

    in reply to: Hoover VHD8122-80 Washer #300226
    RocketMan
    Participant

    Re: Hoover VHD8122-80 Washer

    it’s the heater, mega it on both legs. Had one other week, 3 lights then random/ total lack of control.

    Steve

    in reply to: Bosch SGV4313GB/17 Flooded base #297857
    RocketMan
    Participant

    Re: Bosch SGV4313GB/17 Flooded base

    clivejameson wrote:…this one didn’t have a baffle in the float chamber…..
    HTH?

    I’m glad you said that, I went to similar one about a week ago to replace a float eaten/destroyed by a mouse(and remove all the S&^{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} it left around the float) and afterwards cleaned the usual gunge out of float chamber and tube…but I didn’t see a baffle which prompted my reply the other day…… I thought I’d gone mad or was missing some thing… didn’t notice the restricter in the matrix but wasn’t really lloking for it.. will try and see one at the next job..

    ta

    Steve

    in reply to: Bosch SGV4313GB/17 Flooded base #297851
    RocketMan
    Participant

    Re: Bosch SGV4313GB/17 Flooded base

    I can see it filling too quick but can’t see this “baffle”. What’s the part number out if interest???

    in reply to: Servis tdf90ss #299810
    RocketMan
    Participant

    Re: Servis tdf90ss

    Edit ignore my last post…

    in reply to: Baumatic fan oven element? #298887
    RocketMan
    Participant

    Re: Baumatic fan oven element?

    RocketMan wrote:The last Baumatic oven I did I had to pull it out slightly and get the info off a plate/sticker at the top of the outside cabinet.

    Glad it worked 😀 Did you get a model number??? Just to update the site for any future searches. Might help some one in the future.

    Steve

    in reply to: Bosch WFL12440GB/05 sump hose #299238
    RocketMan
    Participant

    Re: Bosch WFL12440GB/05 sump hose

    its only becuase of lots of mis-readings of Enr numbers by customers in the past that I discovered that you can put almost anything in the search field of the bsh site. In this case I put in 440gb/05 an it came up with three options. Obviously the more details you put in the smaller the list of appliance that come up. Always useful to know. 😉

    in reply to: Bosch WFL12440GB/05 sump hose #299236
    RocketMan
    Participant

    Re: Bosch WFL12440GB/05 sump hose

    WFLI2440gb (I for integrated) 493903 or 490649..


    Edit…oops u beat me to it Gegsy

    in reply to: Baumatic fan oven element? #298877
    RocketMan
    Participant

    Re: Baumatic fan oven element?

    The last Baumatic oven I did I had to pull it out slightly and get the info off a plate/sticker at the top of the outside cabinet. The customer had a handbook but it was a bit too generic and covered multiple models with different fan elements so it was as much use a t*&s on a fish.

    When I did the job I had to write the model details on the front of the hand book.

    It sounds like the last one I did as well. Part number for that was FIL 11700007033 but I fitted a standard Zan fan oven element pattern ZN1421…..although sounds as though that yours is a bit smaller… but the orientation sounds correct…

    HTH Steve

    in reply to: Inde cooker KD3C1(W)G #297890
    RocketMan
    Participant

    Re: Inde cooker KD3C1(W)G

    Sorry didn’t quite realise I’d written so much….pah never mind.

    Must learn to have the courage of my convictions and stand by my diagnosis. Customer rang at about 9.30 last night, had his insurance company call emergency sparky out. I was right, damage cause to consumer unit 😀

    I was right I just needed to convince myself…

    ta

    in reply to: Bosch WFX2867GB trips circuit breaker during heating cycle #297705
    RocketMan
    Participant

    Re: Bosch WFX2867GB trips circuit breaker during heating cyc

    part number 265961. try the shop@ on the left. However, need full model number to be 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} sure of part number. Model number should read WFX2667GB/10 or a different number at the end.

    E-mail shop@ giving full details and they will give you a price


    plug out of course

    in reply to: Whats the most annoying thing customers do? #107700
    RocketMan
    Participant

    Re: Whats the most annoying thing customers do?

    Call you in desperation…

    I don’t normally go out to appliance where the customers have messed about but I need the work.

    Zanu DW no heat,

    new heater from Partsmaster £47.23 inc vat and P&P
    new temperature sensor from e-spares £17.94 inc vat and P&P

    One tiny blob of solder on the pcb and 10 minutes work from me – bingo working. 😀

    The look on their faces – priceless. 😥

    Customer: I don’t suppose you want to busy some spares??
    Me? No thanks

    They looked at each in disgust as if I was out of order 😯

    Watch fleabay tonight for some Zanu DW spares being posted.

    Told em they should have at least gone to UKW for advice before they started forking out money.

    😀 😀 😀

    in reply to: Door seal AEG LAV 74335 #297657
    RocketMan
    Participant

    Re: Door seal AEG LAV 74335

    boselecta

    try this for info

    http://www.ukwhitegoods.co.uk/modules.p … highlight=


    Steve

    in reply to: CDA C1830WH WM #297251
    RocketMan
    Participant

    Re: CDA C1830WH WM

    Hi Chris,

    Found it.

    Fagor part number FAGOR L71D002I0 ou BRANDT 55X9913 or 52×3572

    The Fagor part I got delivered is nothing like it, I think there might have been an error in the packaging. What’s the pump itself?? Is it a Copreci?
    Could get away with pum only I recon??

    Thanks

    Steve

Viewing 15 posts - 511 through 525 (of 657 total)