[roly16]

Re: possiable re-gas needed

It sounds like a refrigerant leak on the internal pipework, assuming your friend would have found it if it had been on the external pipework.

[roly16]

Re: Belling Oven

Thanks wsts

[roly16]

Re: Belling Oven

Thanks Bruce, but that part no. doesn’t exist. Could you check it please?

Thanks

Geoff

[roly16]

Re: Hotpoint fridge freezer FF68

Of course! Why didn’t I think of that?

Don’t answer that one.

[roly16]

Re: Scrap value

I got £60 last Friday; interesting to see what it is tomorrow when I weigh in. I’ll report back in due course.

[roly16]

Re: Hannons Property Lettings Agency, Manchester

I think the company is in financial difficulties but I’ve never met the directors [the Hannon family] so it’s difficult to tell. The builder has been to one of their houses and appearances would indicate that they’d have no trouble paying us with their personal money if they wanted to.

[roly16]

Re: Whirlpool Diplomat ADP8322 Flowmeter.

Not for the sale of a couple of reed switches at 61p each

[roly16]

Re: Whirlpool Diplomat ADP8322 Flowmeter.

What a good idea.

[roly16]

Re: Whirlpool Diplomat ADP8322 Flowmeter.

Or you could just phone them on 01772 654455 😯

[roly16]

Re: Rosieres Range Cooker 4040DB

Thanks for that Bryan. If you don’t move the cooker, how do do the outer ones? Is it the same way, from underneath?

[roly16]

Re: refridgeration thermisters

They are all different but tend to operate between roughly 10 and 50 Kohm.
Negative temperature co-efficient [ntc] thermistors increase in resistance value as the temperature reduces and positive temperature co-efficient thermistors decrease. NTCs are more common but you may find PTCs in some appliances.

[roly16]

Re: Whirlpool Diplomat ADP8322 Flowmeter.

I’ve recently successfully replaced the reed switch [ which wasn’t closing properly ] on the small pcb. It’s CPC part no. SW00172; 61p.

The diagnostics correctly indicated a flowmeter fault.

[roly16]

Re: CDA door seal

Was it fairly straightforward once you decided to use the Beko spring clamp? Can we have the Beko part no. for future reference please?

[roly16]

Re: LEISURE RM10FRS – 04 100235 08 – RIGHT SIDE NOT WORKING?

If Rangemaster make this cooker the user manual might have a schematic diagram

[roly16]

Re: CDA door seal

pmb wrote:Are these a pain to do? or are there any helpful tips to changing these?
thanks Peter 🙂

Remove the tub assembly.

[Author]

Posts