S1MON

Forum Replies Created

Viewing 15 posts - 61 through 75 (of 151 total)
  • Author
    Posts
  • in reply to: Miele G646sc Dishwasher #282055
    S1MON
    Participant

    had a few of these leak from the cir pump, but I have also changed pcb due to no fill.

    in reply to: Neff TD R4381x1GB/01 #282162
    S1MON
    Participant

    was thinking that are they common to fail on these, i replaced the door switch on one before and it made no difference

    in reply to: hotpoint aqxxf 149 pi #278718
    S1MON
    Participant

    I had a o/c element in the week showing F07

    in reply to: Bosch sgs45e02gb/45 #277650
    S1MON
    Participant

    I have had a look through and thinking possible impellor jug

    in reply to: Hotpoint FFA70 fridge freezer freezing up in the fridge. #275303
    S1MON
    Participant

    had one recently turned out o be a system fault

    in reply to: FDW70 HOTPOINT #272807
    S1MON
    Participant

    just fitted the new board with the sensor that clips onto the dispenser

    in reply to: Miele Dishwasher G6915C ‘water inlet’ fault #270142
    S1MON
    Participant

    does the wash motor kick in at all?

    in reply to: Fisher DD603H #269977
    S1MON
    Participant

    Re: Fisher DD603H

    link arms are ok, I will check the heater plate cheers

    in reply to: Zanussi ZWF1621W #262421
    S1MON
    Participant

    just an update on this the motor comm was down under load so new motor did the trick , thing is only 18 months old!!

    in reply to: Bosch dishwasher impellor sealing kit o ring difficulty. #262980
    S1MON
    Participant

    Re: Bosch dishwasher impellor sealing kit o ring difficulty.

    personally tried once to fit a stretched outer seal and it leaked, the old ones never fit back and it has to be a new kit, nothing else seems to work 😕

    in reply to: Bosch WFT2800GB/13 #255224
    S1MON
    Participant

    not sure on program 3 it comes on almost staright away and not at all on 1 and 2?

    in reply to: Enough to make you vomit… #252828
    S1MON
    Participant

    roly16 wrote:

    S1MON wrote:
    One ill never forget went a few years ago during the really hot months of summer, had been called out to a dw in a top floor flat, customer had been away for weeks and cat sitter had been left to feed the cats. What I was not pepared for was the fact the kittys ate fresh salmon for brekkie and dinner and the lovely cat sitter had thrown the bowls and remains straight in the dishwasher. This subsquently blocked and had been left for 5 weeks to fester….. It was probably one of the worst things ive smelt in my life!!

    But did you do the job?

    yep with the help of my ppe

    in reply to: Enough to make you vomit… #252821
    S1MON
    Participant

    One ill never forget went a few years ago during the really hot months of summer, had been called out to a dw in a top floor flat, customer had been away for weeks and cat sitter had been left to feed the cats. What I was not pepared for was the fact the kittys ate fresh salmon for brekkie and dinner and the lovely cat sitter had thrown the bowls and remains straight in the dishwasher. This subsquently blocked and had been left for 5 weeks to fester….. It was probably one of the worst things ive smelt in my life!!

    Oh I pulled a rat out of someones 110 rangemater the other day that was taking a rest over the hot plate selector switch!!!

    in reply to: Lux frost free fridge freezer #249455
    S1MON
    Participant

    have been back too this m/c as it did work but only for a couple of weeks any other ideas???

    in reply to: Admiral Tumble Dryer #250913
    S1MON
    Participant

    I can get hold of it throu work cheers……. Did find a blockage in the frot vent when I tok the front off and the hose is restricted….

    cheers

Viewing 15 posts - 61 through 75 (of 151 total)