[SAMURI]

Re: Indesit UIAA 12 FR

If it is a frost free model then it may not have fully defrosted itself.

Get someone to look after your food and turn it off for 48 hours with the door open to fully defrost it.

Once it has defrosted then turn it back on and see if this cures the problem.

Bob

[SAMURI]

Re: Indesit UIAA 12 FR

This freezer is not a self defrost freezer.

Have you defrosted it since you have had it.

If not it just might need a defrost,

If it has been defrosted and is not freezing correctly it will be a refrigeration fault.

System blocked / low on refrigerant / or compressor fault.

All are not DIY jobs to repair.

Bob

[SAMURI]

Re: AEG OVEN B5741-4-A CUTTING OUT

It may be a cooling fan fault so it overheats and cuts of the power on the thermal cut out.

Bob

[SAMURI]

Re: Indiset CA55 installed in garage.

Food needs to be kept at a constant temperature.

If you leave the fridge on fast freeze for more than 24 hours on an Indisit then the compressor will not last long as it was designed to run on the thermostat temperature set about midway.

This is only a self defrost fridge and not a self defrost freezer.

If you have it set on a timer and it is running when the timer cuts out you can get hot gases feed back into the freezer pipe work if it cut out Midcycle before reaching the temperature the stat would cut out.

This is because the stat cuts out when the fridge temperature is reached and not the freezer temperature.

This model would not be advisable to run off a timer.

Bob

[SAMURI]

Re: February 2016 Conference

Hi Brian

I don’t think the wife would like it if I said the meeting was 2 weeks instead of 2 days.

😆

Bob

[SAMURI]

Re: February 2016 Conference

Thanks Brian.

Still it would have been a good excuse to stay another week before the meeting, if I turned up the week before.

Bob

[SAMURI]

Re: February 2016 Conference

Hi Brian
I have booked for the 2 nights Thursday 25 February & Friday 26th

Do I need to Contact the Hotel.

Thanks

Bob

[SAMURI]

Re: Samsung rs21dcns

Ice maker sensor under the ice tray, the wires will be broken, you can get a new sensor or solder repair the wires.

Cheaper than the complete Icemaker.

Bob

[SAMURI]

Re: February 2016 Conference

I have booked a room for September and Feb next year.

Would not miss it.

See you September

Bob

[SAMURI]

Re: September 2015 meeting

I have booked the room for September.

Would not miss it.

See you September

Bob

PS also booked February next year at the same time

[SAMURI]

Re: September 2015 meeting

I will book later today

Bob

[SAMURI]

Re: February 2016 Conference

I will phone latter and book a room.

Bob

[SAMURI]

Re: AEG SCT71900SO fridge freezer

Wordsofpeace wrote:i have noticed our FF is forming a small amount of ice at the bottom of the freezer box. Reading around it looks like the drain is blocked. I’m fairly competent with diy, so I would like to discuss this model with someone who has prior experience.
I did do a defrost, but it was only long enough to remove the ice.

The noise will be the ice cracking during defrost.

The drain will be blocked and iced up

You will need to get someone to look after your food.

Turn it off and leave the doors open and let it defrost for 48 hours.

Then check above the compressor drain tray it will have a rubber non return valve that could be stuck together not letting the defrosted water to drain.

Or it will have a pipe leading from the Drain and fitting to the bottom of the drain tray.
If it has a pipe you need to take it of and clean under the tap in the sink to clear any blockage,
Then refit it, This should clear the problem.

Bob

[SAMURI]

Re: First4Service/TEJ/VHA/WarrantySolutions.Co.Uk

The details are listed on first post on this thread or PM Ian Dales of Dales-Electronics he will give you Details if you want more info.

Bob

[SAMURI]

Re: Cannon C60ETX

Oven temperature sensor fault but in nearly all cases it is the PCB.

Bob

[Author]

Posts