Seamy

Forum Replies Created

Viewing 15 posts - 526 through 540 (of 2,653 total)
  • Author
    Posts
  • in reply to: Beko D2731 FW Upper Spray Arm #414325
    Seamy
    Participant

    Re: Beko D2731 FW Upper Spray Arm

    Glad you are sorted Nicola 😉

    in reply to: Panasonic American style FF defrost problem #418501
    Seamy
    Participant

    Re: Panasonic American style FF defrost problem

    Theres a defrost heater inbedded in freezer evap’, presuming fridge side operates same way.

    I’ve a service manual I could dig out & e-mail to you if you want it, supply e-mail address in PM .

    Seamy
    Participant

    Re: DEFROSTED FRIDGE FREEZER THEN VERY STRANGE THINGS HAPPEN

    This is better than Eastenders, Corrie & Emmerdale put together, can’t wait for the next episode..

    Poor appliance though, I feeel sorry for it, its been 3 months sick.
    It should have a name by now, how about Boris the Bosch ?

    in reply to: Beko DW600 Dishwasher #418112
    Seamy
    Participant

    Re: Beko DW600 Dishwasher

    They both are clear/see through, wondering what it goes to, as theres not much info on diagram, just list of hoses in parts list, pictures show photos but its not easy to judge how thick diameter of hose they are etc.

    in reply to: zanussi frost free f/freezer zrb324nwo #417826
    Seamy
    Participant

    Re: zanussi frost free f/freezer zrb324nwo

    FP16

    in reply to: Beko DW600 Dishwasher #418110
    Seamy
    Participant

    Re: Beko DW600 Dishwasher

    1800863200 this pipe is a clear one & listed as “hose between fan & sump”

    1800862100 smaller in thickness, this one is similar diameter to a pressure switch hose

    best if you can tell us where the hose goes to from sump

    in reply to: AEG B4100-1-M oven not reaching temperature slected #418052
    Seamy
    Participant

    Re: AEG B4100-1-M oven not reaching temperature slected

    Possibly one of the elements is down or fan running too slow.

    in reply to: zanussi frost free f/freezer zrb324nwo #417824
    Seamy
    Participant

    Re: zanussi frost free f/freezer zrb324nwo

    Point is it gets it going correctly.
    Qualtex do a similar defrost timer to the one required btw

    in reply to: zanussi frost free f/freezer zrb324nwo #417822
    Seamy
    Participant

    Re: zanussi frost free f/freezer zrb324nwo

    Normally its not defrosting correctly, if so it needs the defrost timer changed from a 12 hour to a 6 hour and the drain tray defrost heater changed from a 30 watt to a 44 watt & that normally sorts it, also if fan is dodgy stick one in as well.
    4055208914 timer, 4055208922 heater, 4055179321 fan

    in reply to: Miele G692 SC Plus Woes #417852
    Seamy
    Participant

    Re: Miele G692 SC Plus Woes

    Is there a high pressure switch attached to wash pump? Check this.

    in reply to: Zanussi ZWH7148P – Not turning drum #417868
    Seamy
    Participant

    Re: Zanussi ZWH7148P – Not turning drum

    check pump for blockages, if its not drained totally or has not recognised that its drained it won’t go on to spin

    in reply to: Please help identify this part #417715
    Seamy
    Participant

    Re: Please help identify this part

    Sure looks like one

    in reply to: Miele fridge freezer problem #417592
    Seamy
    Participant

    Re: Miele fridge freezer problem

    Perhaps the fan is defective, have you heard it running recently?
    If not circulating cold air it tends to drop to lowest point & shows as excessive frost on bottom of freezer.
    There are separate sensors in each cavity.

    Do a total defrost & see if it cures it.

    in reply to: All checks out but no heat..!! #417539
    Seamy
    Participant

    Re: All checks out but no heat..!!

    Yes

    in reply to: Miele G1222SC – F51 error code #417510
    Seamy
    Participant

    Re: Miele G1222SC – F51 error code

    Heater relay faulty or heater (high pressure) pressure switch not made because of wash pump impellor blockage more likely on an F51.

    F51,
    One second after the program starts, heater relay K1/1 is activated. This enables a check as to whether the contacts on heater pressure switch B1/13 have closed on switching steps 21/22 or 11/12.

    Cause:
    Heater relay defective; contact open.

    Remedy:
    Replace the heater relay.

    Cause:
    Heater relay solenoid defective.

    Remedy:
    Replace the heater relay.

    Cause:
    Connection from heater relay to electronic module open-circuited.

    Remedy:

    1. Check plug connections.

    2. Check the connection wires for continuity.

    Cause:
    Heater pressure switch open- or short-circuited.

    Remedy:
    Replace the heater pressure switch.

    Cause:
    Connection from heater pressure switch to electronic open-circuited.

    Remedy:

    1. Check plug connections.

    2. Check the connection wires for continuity.

    Cause:
    Foreign objects in heater pressure switch.

    Remedy:
    Replace the heater pressure switch

Viewing 15 posts - 526 through 540 (of 2,653 total)