[Simon46]

Re: Hoover fridge freezer HCA300FK – PCB

Doesnt sound like the usual dead PCB fault. QER repair my Hoover Candy modules. BobHope is an expert on these.

Regards
Simon

[Simon46]

Re: Whirlpool FF Fridge Freezer – Fridge very cold

How does it run on 1?

Regards
Simon

[Simon46]

Re: Hotpoint frost free Mod – 8596 – Service manual

The board is usually darkened in this area. Have they charred it? Have you searched the postings under mistral or 8596? plenty of info there. 🙂

Regards
S.

[Simon46]

Re: Hoover fridge freezer HCA300FK – PCB

This isnt the model where the pcb PSU fails in the “run all the time freezing the milk syndrome” is it? Is the interior light working?

Regards
S.

[Simon46]

Re: Bosch WFR 2860GB/01 wont start

Tony doesnt repair these modules either 🙁

S.

[Simon46]

Re: Whirlpool AWM219 door latch spring

Thanks Dave.

S.

[Simon46]

Re: Whirlpool AWM219 door latch spring

Thanks Chris. There is one white piece of plastic that folds over and clips together. Does ths fit on the spring end to stop it cutting into the door and should there be 2?

Regards
S.

[Simon46]

Re: Bosch WFR 2860GB/01 wont start

Interesting did a Martin with hairdryer on main module machine now works http://www.ukwhitegoods.co.uk/modules.p … ght=wfr{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}2A
but on spin does distribute ramps to full spin and slows to stop. Repeated ad infinitum. Bereit was seen on this one as well.

Will crack it
S.

[Simon46]

Re: Bosch WFR 2860GB/01 wont start

Maxx IT now In garage have seen it speaking German relays clicking and faint black blocks flashing on screen frquency twice a second.error 01. got it to flash a yellow startlight on easycare. More activity on easycare than on cottons but still will not start. I want this one for me.

S.

[Simon46]

Re: BOSCH WFF2000 PRE WASH LIGHT ON

The usual pump/ coin/ blockage Mark 😀 .

Regards
Simon

[Simon46]

Re: HPT DF54P drain pump

Thanks Iadom

S.

[Simon46]

Re: HPT DF54P drain pump

Ah PMP 229. A lot to pay for a modified filter basket.
Also forgot to say the sping tension is lost on the door (drops down). Will it be the springs or something else? And how much? Been a while since i repaired one.

Regards
Simon

[Simon46]

Re: Hotpoint Mistral Plus FF compressor running constantly

Frrezer normally runs around -22 mark (colder than minus 18)and fridge is running at setting. is it in a hot room/ trying to freeze lots of food/ door closing correctly/ not run for 24 hrs yet? Temps sound correct anyway.

S.

[Simon46]

Re: Help need a fridgefreezer in dark green!!!!

What make and model number is the fridge freezer?

Regards
Simon

[Simon46]

Re: Bosch wff1201GB/01 motor toc blown

Thanks all will have a go at TOC17. How is it secured?

S.

[Author]

Posts