Simon46

Forum Replies Created

Viewing 15 posts - 1,966 through 1,980 (of 2,216 total)
1 2 3 … 131 132 133 … 146 147 148
  • Author
    Posts
  • June 29, 2005 at 4:58 pm in reply to: CDA CW494/1 dishwasher not washing. #139812
    Simon46
    Participant

    Re: CDA CW494/1 dishwasher not washing.

    What is the labour charge?

    June 29, 2005 at 2:07 pm in reply to: Broken fins #139809
    Simon46
    Participant

    Re: Broken fins

    From here. But you will need to post make and model number first please.

    Regards
    Simon

    June 29, 2005 at 12:09 pm in reply to: Hoover Performa 110 WA110- having a few problems #139566
    Simon46
    Participant

    Re: Hoover Performa 110 WA110- having a few problems

    Now imagine a second tube larger in diameter that slides over the tubes you can see, but with a gap at the bottom. when water goes down the tubes it pulls the water up the inside of the larger tube thereby sucking the water out of the conditioner compartment. Sounds like the cover is missing.

    Regards
    Simon.

    June 29, 2005 at 11:49 am in reply to: Tricity Bendix DH086 noisy wash pump bearings #139796
    Simon46
    Participant

    Re: Tricity Bendix DH086 noisy wash pump bearings

    Thanks Dave. Thought that it because it was so cheap that it was too good to be true!

    Regards
    Simon

    June 29, 2005 at 11:39 am in reply to: Hoover HPM 130 – wont spin/pump properly #139546
    Simon46
    Participant

    Re: Hoover HPM 130 – wont spin/pump properly

    Seems strange that the pump does stop after running o.k. If it is the same amount of time elapsed till the impellor stops turning,that you viewed through the filter it looks like the supply is being interrupted for some reason. Engineer time i think. Do not diagnose with machine plugged into mains socket. Repairs@ may be able to help you.

    Regards
    Simon

    June 29, 2005 at 6:48 am in reply to: White Knight CL767 #139783
    Simon46
    Participant

    Re: White Knight CL767

    Just a thought if it has an extension lead connected is the plug fuse/lead rated at 13A?

    Regards
    Simon.

    June 28, 2005 at 5:29 pm in reply to: Hoover Performa 110 WA110- having a few problems #139563
    Simon46
    Participant

    Re: Hoover Performa 110 WA110- having a few problems

    Does the syphon action work if drawer is run under the sink tap?

    Simon.

    June 25, 2005 at 12:10 am in reply to: Servis M3016A won’t fast spin #139485
    Simon46
    Participant

    Re: Servis M3016A won’t fast spin

    If the machine thinks it is not empty it also may not spin.

    S.

    June 25, 2005 at 12:07 am in reply to: Hoover HPM 130 – wont spin/pump properly #139535
    Simon46
    Participant

    Re: Hoover HPM 130 – wont spin/pump properly

    Sounds like pump not operating. It should for duration of spin.

    S.

    June 24, 2005 at 6:39 pm in reply to: Bosch fridge/freezer problem #139424
    Simon46
    Participant

    Re: Bosch fridge/freezer problem

    Fridge temp should be in the range 0 to 5 degrees celsius.

    Regards
    Simon

    June 23, 2005 at 7:38 pm in reply to: Indesit WE12 SUK #139450
    Simon46
    Participant

    Re: Indesit WE12 SUK

    Have had a couple with spot weld failure to suspension mount leaking.

    S.

    June 23, 2005 at 3:38 pm in reply to: Bosch brush beware! #139146
    Simon46
    Participant

    Re: Bosch brush beware!

    Am going to get genuine from now on. I want to fit and go, not spend ages doing mods because of inferior quality.

    S.

    June 22, 2005 at 8:46 pm in reply to: Philips AWB045/PH: how does spring fit on door catch? #139401
    Simon46
    Participant

    Re: Philips AWB045/PH: how does spring fit on door catch?

    Thanks Graham. Unfortunatly tried to look for evidence of spring marks on old door (in bits)but the customer had lost the broken pieces. Have fitted door now. Time will tell.

    Many thanks
    S.

    June 21, 2005 at 11:02 pm in reply to: extraction #139323
    Simon46
    Participant

    Re: extraction

    GLM in Wolverhampton do an extraction /fitting kit which by using the WM shaft will extract a broken 6205 outer race. No colletts. 01902 304488. £35 + vat. Instructions included.

    June 21, 2005 at 8:27 am in reply to: Bosch Tech. #139249
    Simon46
    Participant

    Re: Bosch Tech.

    try http://www.bshappliancecare.com/Bosch/boschspares.html. A new format.

    Simon.

  • Author
    Posts
Viewing 15 posts - 1,966 through 1,980 (of 2,216 total)
1 2 3 … 131 132 133 … 146 147 148