Simon46

Forum Replies Created

Viewing 15 posts - 1,411 through 1,425 (of 2,216 total)
1 2 3 … 94 95 96 … 146 147 148
  • Author
    Posts
  • November 25, 2006 at 11:39 am in reply to: SMEG Dishwasher DWF64SSE #196330
    Simon46
    Participant

    Re: SMEG Dishwasher DWF64SSE

    Possibly an exploded Mains suppressor? Unplug power before having a look. Otherwise Repairs@ for an engineer to diagnose.

    Regards
    Simon

    November 25, 2006 at 10:59 am in reply to: Bosch KGV3120GB/01 Switching Problems #196213
    Simon46
    Participant

    Re: Bosch KGV3120GB/01 Switching Problems

    A Pity. This is a good fridge freezer and such a simple repair. 🙁

    Regards
    Simon

    November 23, 2006 at 7:44 am in reply to: Bosch KGV3120GB/01 Switching Problems #196207
    Simon46
    Participant

    Re: Bosch KGV3120GB/01 Switching Problems

    A thermistor may have failed. A Modification will usually cure it. Check out repairs @ or unplug power if you are going to have a look yourself.

    Regards
    Simon

    November 21, 2006 at 9:41 pm in reply to: KGV3120GB01 Not Running #195924
    Simon46
    Participant

    Re: KGV3120GB01 Not Running

    No probs. Ta for 20Quid. Enjoyed Posh Panini in Alderley edge and treated van to some Fuel 😆

    S.

    November 21, 2006 at 9:35 pm in reply to: Candy AQ110 – just doesn’t fancy it!! #195998
    Simon46
    Participant

    Re: Candy AQ110 – just doesn’t fancy it!!

    Just a thought pressure vessel blocked and machine thinks it is full of water?

    Regards
    S.

    November 21, 2006 at 9:28 am in reply to: KGV3120GB01 Not Running #195920
    Simon46
    Participant

    Re: KGV3120GB01 Not Running

    Have a look here Guys. Search Facility is useful.
    http://www.ukwhitegoods.co.uk/modules.p … v3120gb+01

    Regards
    Simon

    November 16, 2006 at 7:05 am in reply to: Hoover Bagless V2510 armature lightning storm #195574
    Simon46
    Participant

    Re: Hoover Bagless V2510 armature lightning storm

    Thanks Phidom. At nearly 50 quid it is beyond repair.

    Regards
    S.

    November 13, 2006 at 10:19 pm in reply to: Baumatic B723SS-A fan oven element #194958
    Simon46
    Participant

    Re: Baumatic B723SS-A fan oven element

    Rang Baumatic in reading. ordered but a record 1H03mins on queue 😯

    S.

    November 11, 2006 at 10:04 am in reply to: Baumatic B723SS-A fan oven element #194957
    Simon46
    Participant

    Re: Baumatic B723SS-A fan oven element

    ELE 6336 fitted a treat. unfortunately selector switch is blown to bits (main oven first knob on left next to clock) any idea on part number/ price

    Regards
    Simon

    November 8, 2006 at 6:52 pm in reply to: Ariston CD12TUK no drum rotation on dryer cycle #190703
    Simon46
    Participant

    Re: Ariston CD12TUK no drum rotation on dryer cycle

    Fitted New timer today. Fault still present 🙁 . checked 4 solenoid coils dismantled dryer timer contacts ok heater ok door interlock m/switch working, pressure switch contacts changing state. This has really got me stumped. Could it be module? Wash is perfect though.

    Regards
    Simon

    November 1, 2006 at 5:14 pm in reply to: Creda 37747 condenser rear drum seal fitting #193967
    Simon46
    Participant

    Re: Creda 37747 condenser rear drum seal fitting

    Thanks Martin 😀

    S.

    October 31, 2006 at 8:48 am in reply to: Bosch SGS5312GB – cycles taking too long #190569
    Simon46
    Participant

    Re: Bosch SGS5312GB – cycles taking too long

    I would also reflow the solder joint on the relay. I have had milky detergent deposits reported from customer due to no heat. Power off/Protective gloves (razor sharp door edges) before doing so.

    Regards
    Simon

    October 28, 2006 at 3:17 pm in reply to: Urgent. Hotpoint WMA46S door will not lock #192362
    Simon46
    Participant

    Re: Urgent. Hotpoint WMA46S door will not lock

    Fitted door lock handle latch kit. Works ok 1 hr. Then interlock click during distribute with motor kick and door is unlocked. locked light flashing after 2 secs. motor insulation ok. no chafed wires. Must be module? intermittent fault then happens all the time. 😕

    S.

    October 26, 2006 at 7:55 am in reply to: hotpoint fhp motor #193443
    Simon46
    Participant

    Re: hotpoint fhp motor

    Wiring chafed on cabinet? Loose coonection in motorplug?

    Regards
    Simon

    October 23, 2006 at 8:17 am in reply to: Whirlpool freezer module up in smoke #192368
    Simon46
    Participant

    Re: Whirlpool freezer module up in smoke

    No configuring required with this is there before i fit


    Regards
    S.

  • Author
    Posts
Viewing 15 posts - 1,411 through 1,425 (of 2,216 total)
1 2 3 … 94 95 96 … 146 147 148