Forum Replies Created
-
AuthorPosts
-
Specialist01269
ParticipantRe: No power to drum motor
Hi Anik: Does anything else work ? i.e does the Door interlock work, does it take in water etc ?
Specialist01269
ParticipantRe: Miele W902 wash light flashes all through prog.
Cheers Clayside: Thought it might be in the element but wasn’t sure, don’t see much Miele stuff down here.
AndySpecialist01269
ParticipantRe: Miele W902 wash light flashes all through prog.
No problem Mike, only sorry I couldn’t tell you the exact location. Let us know how you get on.
Andy
Specialist01269
ParticipantRe: SANYO EM-SL30N Microwave Oven
Hi: I’m sorry but due to the Dangers involved in Microwave oven repairs, we don’t give out any repair information on them. Your best bet would be to find an engineer in your local area that does Microwave repairs.
Specialist01269
ParticipantRe: Miele W902 wash light flashes all through prog.
NTC : Thermistor temp sensor. Not sure where it’s mounted on this machine, possibly built into the heater assembly.
Specialist01269
ParticipantRe: Whirlpool American t/d
Your welcome mate: If you have any problems finding the info you need, PM AJ the Forum owner. He’s a really helpful guy & will track down the info for you.
Specialist01269
ParticipantRe: Whirlpool American t/d
Hi Hilly: Take a look at http://www.appliancejunk.com You should be able to get the service manual for it or ask the guys and you may get your answer. It’s a sort of American version of UKWG with some really good people on it.
Specialist01269
ParticipantRe: zanussi ZWD12270G1
If you open the door & try to move the drum by hand, does it move easily ?
Specialist01269
ParticipantRe: The 0800 Thread
Sorta makes me glad I’ve never been involved with JTM or 0800, sounds like a minefield to be honest.
Specialist01269
ParticipantRe: The 0800 Thread
lee8 wrote:
PGS wrote:
You Guys need to get a life. Or get out there leaflet dropping if this is all you have to do all day, and no im not an 0800 engineer. This forum should be constructive, informative and helpful, maybe you were off school the day they taught these things. ISSUE CLOSED.You don’t get out much do you. 😥
For the people who know you, that must be a relief. 😆
Careful the door doesn’t hit you on the way out. :rotfl:
😆 :rotfl: :rotfl:
Specialist01269
ParticipantRe: The 0800 Thread
funkyboogy wrote:last i heard mike was seen being bundled into a blacked out van with a big dagger on the roof .. witnesses think the van had writing on it ? – 008 or something ?
ally
Wasn’t me Ally, Honest I didn’t do it 🙂 Would be nice to know what happened with Mike though, Just hope he can fight his way back.Andy
Specialist01269
ParticipantRe: The 0800 Thread
Ken:You won’t get get any argument from me matey, this could be going on for as long as 0800 stay in business. Wonder what happened to Mike though, he was going to give an update on what went wrong between him & 0800. Having said that he may not want to say too much if he’s going to be taking them to court.
Specialist01269
ParticipantRe: The 0800 Thread
As has been said: If he didn’t like what was written & as it didn’t concern him nor were the comments we made directed at him then he should have kept moving on, nobody forced him to read it nor comment on it. As for his comment about the issue being closed, there never was an issue that I know of.
Specialist01269
ParticipantRe: The 0800 Thread
funkyboogy wrote:it has been a bit quieter lately = more posts
dont like the song on radio turn it of .. dont like the posts dont read them.
ally
Yo Ally, Totally agree with you mate. If you don’t like whats written & it doesn’t concern you then move on.
:eeek: PGS: The Forum is always Constructive, Helpful & Informative where it’s needed. In this case it doesn’t need to be.
Specialist01269
ParticipantRe: Hotpoint WDL520P
Allsorts wrote:The airflow through the box
George
Hi George: Thanks mate, airflow is fine. Duct is clean but as suggested will remove the filter screen anyway.
-
AuthorPosts
