Forum Replies Created
-
Posts
-
Re: New layout.
Beginning to like the new layout, now i’m getting used to it.
Colour is definately much better than the Orange, easier on my poor old eyes 8).Re: hotpoint BWM20 board blown
Hi John: Any chance of you posting up a Picture of the PCB? If you can trace the tracks from the chip to the board connector it feeds, you should be able to find what blew it.
Re: Hoover – HNWL 31680 – stop button flashing
Customers responsibility to have the machine removed for you to work on, they may say that you can remove the tiles to get it out but I would’nt risk it. It’s too easy for them to forget they told you that & try claiming for any damages, more than 1 Engineer has been caught out by that 1. Tell them you’ll come back to check the machine once it’s out as your Public Liability insurance does’nt cover you for that.
Re: Indesit model WG1234T
Hi: Please be aware that the Electronics on these machines are notoriously bad & it is possible for them to blow for no reason.
PLEASE REMEMBER: POWER OFF & PLUG OUT BEFORE DELVING IN, A :zap: can kill.
If you remove the top cover & look where the mains flex enters the machine, to 1 side of it you will find the mains filter. Can you check that the top of this is not bulged or blown out.
Re: Indesit model WG1234T
Did it stop mid cycle with a burning smell ? or did it just not start a cycle & smell of burning.
Re: Zanussi FJS1425w water not heating & e41
No problem: Yes you should be able to run any 2 cycles & the error codes will re-set.
Re: Indesit WIL103
Cheers Jim, gotta be honest did’nt look in the shop as I thought it was only retail.
Andy.
Re: Zanussi FJS1425w water not heating & e41
Ok do you have a Multimeter & know how to use it? you will need to use 1 for any fault finding on your machine. Before we get into that can you run the 2 cycles as Helo 75 suggested & let us know what error code you get.
Re: Seriously….no buyer is this stupid!!!!!
If anyone knows of a T11 exemption, i’d be happy to hear about it.
Re: Zanussi FJS1425w water not heating & e41
Hi: Hello 75, would have pulled you up on what you wrote whether you were a man or woman. We know there are Cowboys in this trade as there are in any other. Please do not Tar us all with the same brush, the engineers that provide advice on this forum freely give up their time to do so.
Re: fisher paykel dishwasher
For a service manual try here: http://www.jordansmanuals.com
Re: Seriously….no buyer is this stupid!!!!!
leavemetogetonwithit wrote:Not me! I’m saving my dosh for this. Just contacting the train company to see if they’ll mind me taking it on board. 😆
Mike.:rolling: Think i’ve still got 1 of those in my old workshop, damned thing still works too. 🙂
