Forum Replies Created
-
Posts
-
Re: How do I change the door seal on a Hoover Optima
If there aren’t any screws it’s a complete door.
Not heard of anyone succesfully changing a moulded in one.
You could if it’s only cracked fill up the seal in the damaged area with white bath sealant,will harden over a couple of days and usually does the trickRe: Stinky Pete
gandh1 wrote:
spimps wrote:
stink like an algerian wrestlers jock strapand you know this from previous experience?
It was in the changing rooms :hide:
Re: refridgeration rig
What do you need to do?
Have replaced vacuum pump parts/seals etc and also the same on recovery machine,spares are available from folks like javac.Re: avi wine cooler
You can use an LAE AT2-5BS4-AG(P),it is a ontroller with a digital display which you program to your needs.Just neeeed to make a rectangal in a panel soewhere to house it.
Similar products made by carel and Elliwell,try SRW,co.ukor hawco.co.uk.Re: commercial washing machine
Depends what they are required for,catering,nursing home(sluice facility usually required),what size etc.
JLA at Halifax for IPSO and maytag or Armstrong Laundry systems in Newbury for Hubesch, Speedqueen both excellent machines at the price.
With most of these you supply the warranty labour foc,which means bigger margins on sales.Re: Texting from a pc
funkyboogy wrote:we use txtmagic , probaly similar to others
we personaly show txt no -so customer can txt back , also if they txt back we have it set to send us an email of txt , good if your out of office and can access your email – lets you check any txt,s replys ..
we ask customers to comfirm their appointment so this works for us as a simple txt back lets us know they are going to be in ..
you can send txt to landlines but dont think its very clear ..
ally
Texting to landlines spoils the swearing 😀
degrees will helRe: New seal on Hotpoint freezer not sealing
You need to position the door via the lower hinge to get it as good as possible,then get your hair dryer heat up the seal giving it a small stretch where it doesn’t contact the cabinet well.
.Switch off and lean it backwards on a wall at 45 when adjusting this well help the door assume it’s best position.
Hopefully it was a genuine seal and not a kit (pants).
Check hinge pins are not worn.
They can take a few days to form correctly,might need a couple of adjustments.Re: Texting from a pc
Just plug phone (nokia) straight into laptop,30 seconds,also,if you are using outlook 2010 all your diary stuff is on the phone so reminders for jobs etc will appear on the day.
Re: hotpoint fridge freezer defrost drain blocked
The heat from the compressor won’t melt it,comes out above the tray.
Pain to defrost at the best of times,there is often a rubberised flap within the drain tube which gets blocked or stiff and doesnt open easily.
Hair dryer or steam cleaner will help.Re: Fridge not cold and freezer too cold
Was there any ice formed around the evaporator fan area when you changed parts?
Re: ZanussiZI920/8FF Fridge not cooling
By “the back” it’s the false back of the freeezer,inside the freezer where the fan and evaporator are,notbehind the freezer.
While you have it out good chance to clear dust etc.Re: ZanussiZI920/8FF Fridge not cooling
there will be flow and return vents,usually visible when freezer back plate removed,one above the evaporator and one below if my memory serves me right.
