[spimps]

Re: F Gas Interim certificates

Thanks,sorry I must have missed that off,have been away for 4 weeks myself so got to get back up to speed.
hadn’t seen rain since 12th July but it’s made up for it in the last 12 hours 😯
Will pm NI number.
THKS
BG

[spimps]

Re: sios disk

Can’t remember exactly but 50-70 ish rings a bell,not the easiest thing to use either.

[spimps]

Re: closing down

spimps wrote:Off to watch the Tour de France for a few days on 8th then staying on till early Aug to top up the tan 😀 .
Cavendish is awesome,50 mph on a bike 😯

[spimps]

Re: Norfrost Freezer

Will be similar to Gram commercial temp indicators,new ones come with a batterey fitted and you just pull out a paper lug to start it working.No on off switch,if you can pop it apart you should find it’s a battery similar to many remote key fobs.
BG

[spimps]

Re: no work

LJDomestics wrote:Excellent point that iadom, The baumatic i done last week has starting to corrode away the tub around were the salt cap covers.
Mite pay to stick the false teeth in at nite instead of the glass on the bedside cabinet? lol

IDL500 today with a pin hole at the side of the salt cap,possibly a fault in the stainless or it’s not of high enough spec.

[spimps]

Re: closing down

Off to watch the Tour de France for a few days on 8th then staying on till early Aug to top up the tan 😀 .
Cavenfish is awesome,50 mph on a bike 😯

[spimps]

Re: sios disk

ASD SERVICES in Leeds 01133936680
BG

[spimps]

Re: POND PUMP

Kept Koi for 25 years and having spent ???? on the fancy stainless stell cyprio expensive pumps i found that the Clarke submersible’s from CPC were far and above the best value.,

[spimps]

Re: rsh1dtmh samsung side / side f/f

This may help

[spimps]

Re: Hotpoint 8932

Ta very much,bring on the hol’s 7 days and ounting 😀

[spimps]

Re: Hotpoint 8932

Model is TFG27PFXB Then GR no 251156
Cheers
BG

[spimps]

Re: APP6403 is now very hot on the outside after changing PC

Is this an upright freezer?whereabouts on the cabinet is it hot?

[spimps]

Re: Scandinova UFA265W

UNPLUG FIRST :zap:
The compressor readings show a fault with the motor which may have taken out the board.
The three terminals on the compressor are situated in a triangle.
one is the start winding one the run and the other is a common,
resistance readings across the start and common and run and common windings added together should be the same as the reading taken from run to start,if they don’t add up equal in that way you have a fault in the compressor.

[spimps]

Re: Hotpoint 8932

Cheers I’ll have to check the serial number and try GE.
BG

[spimps]

Re: Compressor replaced but still have problems. Opinions pl

Have changed from electronic to mechanical stat on occasions but thats only when the fridge/compressor is running correctly to avoid shelling out £140ish on control units when a mechanical can be fitted for £75ish,always been on larger capacity larder fridges 8 cuft plus.
Wouldn’t change gas over myself,if the machine was designed to run on 600a then putting another type of compressor and different gas in then the capillary/metering tube may not be the correct length to give correct pressure at evaporator to obtain optimum refrigeration.
Why would you do that ?it just complicates a straight forward repair.
Sorry but your in a bit of a hole,lets hope he can work wonders.
Let us know the outcome.

[Author]

Posts