spimps

Forum Replies Created

Viewing 15 posts - 886 through 900 (of 1,200 total)
  • Author
    Posts
  • in reply to: Scandinova UFA265W #290326
    spimps
    Participant

    Re: Scandinova UFA265W

    ?
    Wiring diagram shouldnb’t be needed,
    Any sign of life?
    Is there any noise,clicking etc?
    Not complicated wiring at all,a few clues s to what is or isn’t happening would enable us to narrow down the possible fault.
    BG

    in reply to: HTPT VTD00 #290260
    spimps
    Participant

    Re: HTPT VTD00

    tks
    bg

    in reply to: SAMSUNG rs21ncsv #290192
    spimps
    Participant

    Re: SAMSUNG rs21ncsv

    Thanks chaps

    in reply to: HOTPOINT – FRIDGE FREEZER FFA74 #290108
    spimps
    Participant

    Re: HOTPOINT – FRIDGE FREEZER FFA74

    An old magnet off a microwave is handy to drop over valve to check mechanical part of valve will open.
    BG

    in reply to: connects parts specification message #288834
    spimps
    Participant

    Re: connects parts specification message

    How long does it take to get a parts enquiry back from connect? 24 – 48 hours whats the norm

    in reply to: Whirlpool awm9000 washing machine #290059
    spimps
    Participant

    Re: Whirlpool awm9000 washing machine

    For test prog on this select drain and press the pe wash button 4 times in less than 5 seconds.
    BG

    in reply to: New way to replace Bosch brushes. #289679
    spimps
    Participant

    Re: New way to replace Bosch brushes.

    P45’s video is interesting but makes very little difference to us earning a living out of it,he is of great value to this site especially the trade with knowledge and help etc,never failing to despatch info at the press of a button.
    AS a younger man you do try and do jobs yourself it’s natural to those who have skills with family expenses etc to try and cut down costs,as folks get older it ‘s not the case,some who would have done diy in thier 20’s and 30’s won’t consider it in later life and get someone in.
    I personally think the helpful approach if you are generally like that probably attracts more work overall,although sometimes you can be taken advantage of.
    A lot of knowledge is gained by using the forums on this site even the public ones just by reading through.
    We are all different thank goodness, else the forums would be very boring, and long may it all continue.

    in reply to: Bosch Exxcel KGU31164GB warmer at top #289972
    spimps
    Participant

    Re: Bosch Exxcel KGU31164GB warmer at top

    Noise was likely from fan catching ice build up behind panel at the rear of freezer,it’s not just the ice you see it’s behind the panel.it can be taken off and defrosted with a hair drier.
    Defrosting fully, if the door was left open switched off and left would take 36 hours,it’s still blocked by the sound of it.

    in reply to: Baumatic Cooker – Steam & Condensation Problem #289914
    spimps
    Participant

    Re: Baumatic Cooker – Steam & Condensation Problem

    The oven most certainly has a fault,design should incorperate a vent/cooling fan which will disapate the steam,as for dripping condensation leaking from door seal thats ridiculous to say it’s within spec.
    Don’t accept,get back onto them at a higher level until you get satisfaction or an exchange.
    Probably best to put something in writing.
    BG

    in reply to: Fridge Freezer stopped working #289232
    spimps
    Participant

    Re: Fridge Freezer stopped working

    The fan doesn’t run until the evaporator drops to a preset temp which it is not acheiving so it won’t run,is he aware of that?who knows?
    From what you have said the system appears blocked.
    Is the engineer right?he could be.We are trying our best to give a considered opinion on your description,then again he may not be right.

    in reply to: Hotpoint(Bosch) DWF31P/17 blown up triac. #252779
    spimps
    Participant

    Re: Hotpoint(Bosch) DWF31P/17 blown up triac.

    Cheers

    in reply to: Scandinova UFF238W Upright Freezer Control board. #289802
    spimps
    Participant

    Re: Scandinova UFF238W Upright Freezer Control board.

    Try Googling for Scandinova spares,there are several sources.
    BG

    in reply to: Hotpoint(Bosch) DWF31P/17 blown up triac. #252777
    spimps
    Participant

    Re: Hotpoint(Bosch) DWF31P/17 blown up triac.

    Could you let me know where you got the Z9M triacs from please.
    Thanks
    BG

    in reply to: Belling 100DF Fan assisted oven not functioning #288861
    spimps
    Participant

    Re: Belling 100DF Fan assisted oven not functioning

    No life at all in this cooker ?
    Are there any lights showing on the display panel?
    Is the auto cook enabled ?.

    in reply to: Another joke. #137470
    spimps
    Participant

    Re: Another joke.

    A couple were lying in bed together on the morning of their tenth wedding anniversary when the wife says ‘Darling, as this is such a special occasion, I think that it is time I made a confession.

    Before we were married I was a hooker for eight years.

    The husband ponders for a moment and then looks into his wife’s eyes and says, ‘My love, you have been a perfect wife for ten years, I cannot hold your past against you, in fact maybe you could show me a few tricks of the trade and spice up our sex life a bit?’

    She says ‘I don’t think you understand, my name was Tom and I played rugby for Wales

Viewing 15 posts - 886 through 900 (of 1,200 total)