Forum Replies Created
-
Posts
-
Re: S20BRBB20-AG
Hello,
When you press the “test” button on the icemaker, it should go through a harvest cycle, regardless of freezer temperature. If it does not, usually a faulty ice maker assembly. If it does but not fill with water, then the solenoid fill valve.
Any help?
TM
Re: Samsung rs21 defrost heater ohms
Hello,
If it is the yellow evap sensor you are talking about, the white ones were prone to water ingress. Then giving out-if-range readings to the control module.
The heaters are around 5 Ohms. and there is a newer modified version of that too now. I have them in-stock, please PM me if you want one.
It sounds to me as if the thermistor could be faulty. Set it to a forced defrost and then see if the heater starts to warm up. Often what happens is the sensor is faulty after a 30-90 seconds you will hear a click from the rear board and the power to the heater will be cut. Also have the sensor from stock.
Let me know
TM
Re: wpool amewrican s20ccbb31-a
Hello,
Motorised baffle are common failures.
But it could be the thermistor, don’t have the part number to hand but it is sold by whilrpool, ASD Connect.
Sure the baffle has been replaced?
Tried sliding ity open and see if it closes?Have you tried with the fridge door lamp switch o/c or c/c?
TM
Re: LG Amercican style fridge freezer unit
Hello,
Have a look for the ice tray sensor (thermistor) coming loose from the underneath.
Let me know?
TM
Re: VTD65 Hotpoint PCB Module Program
Thanks for the reply.
I sent a PNE in to Connect and they came back with 2 parts. An eeprom and PCB Module.
I spoke with my Brother who has a hand held unit.
Apparently, I have to buy this one time use Eeprom and pop it into this machine after replacing the board and it has a one time use, dispose of?
Sounds like a plan!
TM
Re: Domestic and General cutting agents
lee8 wrote:I can’t wait for the day D&G quit selling appliance policies and clients sort it out themselves, the rest of Europe seem to manage without it.
I thought GT was setting up agents in Europe due to the Demand for Insurance backed Breakdown cover!?
Re: Domestic and General cutting agents
We used to do a lot for D&G, then they cut us down to nothing.
LM cannot even find the courtesy to respond to emails and letters we and others have sent in response to this.
We have always given great service, never fell below 80{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} first time fix inc gas work, even hit 93{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} FTF one qtr.
More annoying is the complete idiots they have replaced us with who they often ask us to mop up after. Sadly, despite then fixing and pacifying the client. They will then never renew with D&G.
What D&G seem not to be able to comprehend is that once you have upset and lost a customer, you have lost them for good. Despite trading behind manufacturers Brand names.
What D&G will not be able to do is replace The good Independent Engineers (Many of whome still take on and train their own Engineers) once they have fallen by the wayside. Insurers will then be at the mercy of manufacturers or costly write offs.
End of, best get your act together Miss M.
Re: Strange AEG Wm fault
Sorry
AEG
Lavamat 72630 Update
Model: 72630-W
S/N 12964479
PNC 91400209601I have managed to get it to start but the numbers on the timer simply countdown to 0 then zilch?
â„¢
Re: Strange AEG Wm fault Diagnosis Mode
How do you get these machines into diagnosis mode?
I am going to one today. When start is selected, a few clicks can be heard but the red lamp simply flashes.
I am thinking possibly the interlock?
â„¢
Re: Hotpoint FF92 Frost Free “P1” Error
iadom wrote:Is the e-mail in your posts and profile dead. Its the City Cooling talk talk . net one.
Both e-mails I have sent have gone without any problems.
If you have another e-mail address then send me a PM and I will send it to that.
There are no P error codes mentioned in the manual.
Jim.
Hello Jim
Yes the talktalk one and has come through. My apologies, when you said “inbox” I understood this to mean the PM inbox.
Have had troubles with TT but all sorted now. .pdf recieved
Many thanks for your kind help and assitance
â„¢
