[timdowning]

Re: Repair Care

Just looked on hoovers website;

The basic salary package starts at £19,178 (£23,500 OTE) 33 days paid holiday.

Hoover Candy has immediate vacancies for Service Engineers in the following areas:

Ayrshire, Aberdeen, Central Scotland & Scottish Borders, Bournemouth, Kent, Southampton.

[timdowning]

Re: Trade Insurance

I use Trade Direct for my PL and van insurance.

01483 521 650.

[timdowning]

Re: ZDW1681W

Condenser blocked?
Cold valve / dryer side open circuit?
NTC faulty?

I think model might be ZWD1681W.

[timdowning]

Re: Servis M6505S

You would still get the lights come on even if the door lock was faulty. check wiring on pcb. if all ok pcb at fault.

[timdowning]

Re: ISE 5 – problem.

The leak and noise may or may not be related.

Best, as you say, to give your local supplier a call and get them out.

I would stop using the machine to be on the safe side as water and electrics aren’t the best mix.

There are many reasons to why it may be leaking.

I know of no issues in particular in regards to the ISE5.

[timdowning]

Re: Whirlpool shame

get the details posted on the new sticky timdowning suggested

And I was getting the feeling the suggestion fell on deaf ears!!

How do you set up a new sticky anyway??

[timdowning]

Re: WASHING MACHINE HOOVER 6 (1100)

Common leak is from the breather tube. This tube is on the left side of the machine that runs from the pump up to the dispenser.

Also could be outer tub seal leaking.

Unplug machine when working on it!

[timdowning]

Re: servis m6725w three flashes

We’ve had this discussion before;

What was the part number of the board fitted? was it 546089200?

If its is the above module then I would say either its a wiring problem or the module fitted has been programmed with the wrong information.

On the left side of the module you should have 2 blocks of connectors. The way I remember the wiring of these is there should be 4 of the gold contacts unused at the top.

On the top of the board you have 2 more connectors. One with two wires and one with 8 I think?? I’m sure its the longer connector on the left then the smaller connector on the right??

If its a programming fault then you will either need an unprogrammed module or the Janus hand held unit to re-do the tag insertion.

The wiring is from my memory!!!!!!!!!

[timdowning]

Re: hnd615 dishwasher

I didn’t ever get an answer to this. I priced the job up for a module change but customer didn’t get back to me.

[timdowning]

Re: Maytag MDE8426agw

Thanks for advise.

Went this morning and found short coming from motor. disconnected motor cleaned terminals and reconnected and is now testing ok. 😯

Thanks for telling me how the front came off. great help.

I thought the hotpoint vtd range leaked fluff badly until I saw inside this maytag.

Fingers crossed for now. I’m sure the motors ain’t cheap. ❓

[timdowning]

Re: Servis M6012S

I hope the sump connection is the same diameter.
❓

[timdowning]

Re: Servis M6012S

I’ve got 518008100 in stock. Its the latest type. It substitutes yours.
Does your machine have 3 hoses going to the pump or just 2?

This pump has hose connections for the sump and drain. no smaller connection for the pump to dispenser.

You can buy it off me for £24 plus p+p. ( I would guess £3 or £4).

Not much of a saving I know but it all helps.

[timdowning]

Re: Bosch Brush fitting – which direction?

What ever way sounds the smoothest!!!

You will know when you even turn the motor pulley by hand!!

Make sure machine is unplugged when refitting motor / parts!!

[timdowning]

Re: TL71

Cheers.

[timdowning]

Re: Servis M6012S

You can just use a universal askoll as long as the pump body is ok!

[Author]

Posts