Forum Replies Created
-
Posts
-
Re: Bosch WVD24520GB08 no dry
Yes top section of description is normal behaviour.
The bottom half of your description is generally caused by the hose at the bottom of the condenser becoming blocked. A very awkward hose to get to but can be done in situ. Swearing & plasters required!
Re: Hotpoint TDC30 no heat
The clean filter light coming on is normal.
Did you check the front stat?Re: Bosch Classixx SGS53C12 Dishwasher
Remove the salt cap and make sure the plastic nut underneath the salt cap is nice and tight. You may have disturbed it in your efforts to check things?? If it isn’t tight water leaks into the base and activates the safety float.
Re: Panasonic NA1687VX2 bearings.
4 hours plus job if this post is anything to go by.
Re: Here’s To The Crazy Ones
A lot of it comes down to the fact that people have zero money. The stress of not having a single penny drives them to this. It is the only way of getting something essential fixed. The amount if people I go to who say they don’t have £50 or £60 until the next pay day. Its scary!
Re: Indesit DIF04UK D/washer NOT Starting
Did you take the door off to have a look at the door switch & wiring?
Re: Water not heating
Assuming the readings are good? And the heater insulation is OK. And there are no broken wires. Then it will be the module.
Re: kenwood kdw60w freestanding d/w not heating
Is this the model with the two stats screwed into the under side of the tub? Or is it the model which needs an extra pint of water to switch the heater on? (Pressure switch issue)
Re: Hotpoint Aqualtis AQXXD169PM drum swap
Nice job. Every part off, every part back on. Give yourself
plenty of space to lay it all out in order. Do make sure you get the top 3 tub springs in the right order and hooked into the correct lug.Re: bosch wae28469gb/14 "0" in display
Child lock? Download the manual to check for that model.
Normally holding the start button for 10 seconds gets rid of it??Re: CURRYS KNOW HOW
Mike, just out of interest why did you go down the franchise route?
I thought you worked for yourself before?
