timdowning

Forum Replies Created

Viewing 15 posts - 1,231 through 1,245 (of 2,180 total)
  • Author
    Posts
  • in reply to: WAE24363GB #318331
    timdowning
    Participant

    Re: WAE24363GB

    Thanks for that.

    Much appreciated.

    in reply to: AW23 dead #318243
    timdowning
    Participant

    Re: AW23 dead

    Go 10 posts down or search AW23 AND display.

    😉

    in reply to: Call Divert #317780
    timdowning
    Participant

    Re: Call Divert

    When I first started using call divert about seven years ago. I found that there was a good 7 second pause before you get a ringing tone.

    This is when I asked BT to put a message on, to let people know something is happening. I thought the 7 seconds of silence was enough to make people hang up.

    Does anyone else experience that sort of silence before connecting?

    in reply to: Call Divert #317778
    timdowning
    Participant

    Re: Call Divert

    Thanks Martin. Thats interesting, food for thought.

    My concern is that with my call diversion the customer gets a message saying….’please hold the line your call is being diverted.’
    I’ve always wondered how many people hear this and hang up before it connects to my mobile.

    in reply to: Call Divert #317775
    timdowning
    Participant

    Re: Call Divert

    Martin, just out of interest, how do you know its 95{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}?

    in reply to: Hoover softwave – new brushes – burning smell #317725
    timdowning
    Participant

    Re: Hoover softwave – new brushes – burning smell

    I did find that the grooves caused bedding in problems.

    So I always ‘smooth off’ the new brushes before fitting them, never had a problem since doing this.

    in reply to: Bosch Tumble Dryer WTE86304 GB/05 #317733
    timdowning
    Participant

    Re: Bosch Tumble Dryer WTE86304 GB/05

    Theres a couple of bosch dryer posts a few down from here. Have you checked door lock side of things?

    in reply to: ISE 10 problems already! #315863
    timdowning
    Participant

    Re: ISE 10 problems already!

    Is it possible to plug the machine into a different socket?

    Its rare but the socket or switch on the socket could be faulty?

    in reply to: ISE CI555 #317467
    timdowning
    Participant

    Re: ISE CI555

    K, I know its not acceptable and not something I would do or have ever done.

    You posted saying that he may not know how to do the job or that he may want to write the machine off. I was throwing the third possibilty into the equation that he may be trying to have all the parts in place to change it as a complete unit to save time. As in alfie’s first post he wrote this…

    Is it possible to get a complete outer & inner drum unit already built up?

    Moving on, the answer is not to sell a machine to someone who lives 60 miles away. Unless you can write the cheque yourself. 😉

    Bazza500 wrote;

    should I phone ISE and tell them I am making too much money off their calls??

    Yes. 🙂

    in reply to: ISE CI555 #317464
    timdowning
    Participant

    Re: ISE CI555

    Alfie, why don’t you see if theres someone closer to the job to save you all that mileage!

    Did you sell the machine?

    I would imagine Alfie ordered all those bit so he can do a straight tub swap without messing about. I’m sure its not to write the machine off?

    in reply to: Bosch WF02866GB Door Switch #317417
    timdowning
    Participant

    Re: Bosch WF02866GB Door Switch

    I would try holding the start button for 5 to 10 seconds first. It sounds like child lock is on.

    in reply to: HOTPOINT FDW80G STUCK IN DEMO #317305
    timdowning
    Participant

    Re: HOTPOINT FDW80G STUCK IN DEMO

    Just did a search and found this;

    Press and hold the Start/Reset button until you hear three beeps. Then press and hold On/Off & Start/Reset together until you hear three beeps. Hopefully this will clear the problem, failing that a swift kick in the side whilst cursing the spaghetti munchers who made this machine( Indesit) may not improve matters but it may make you feel better. Great food, shabby appliances.

    Jim.

    Tim.

    in reply to: Fight!..Letting Agent v’s Tenant v’s Landlord #316968
    timdowning
    Participant

    Re: Fight!..Letting Agent v’s Tenant v’s Landlord

    Martin, did you establish before you began the work who would be paying the bill?

    in reply to: Whirlpool ADG7560/1 circulation pump/heater conversion #290075
    timdowning
    Participant

    Re: Whirlpool ADG7560/1 circulation pump/heater conversion

    What was the outcome of this job?

    Cheers.

    in reply to: Indesit WDG1295 #315223
    timdowning
    Participant

    Re: Indesit WDG1295

    Thank you.

    Again. 🙂

Viewing 15 posts - 1,231 through 1,245 (of 2,180 total)