Forum Replies Created
-
Posts
-
Re: All flashing HOTPOINT WF540PB
Classic board fault – in stock – ready programmed – £44.90+vat
http://www.emwelec.co.ukRe: Diagnostic methods.
We are happy to help new engineers diagnose faults over the phone whilst they are on the premises looking at the machine. If you misdiagnose and fit one of our parts, you can return it for a £5+vat handling charge. Give us a call on 01159652118 – Tony EMW Electronics http://www.emwelec.co.uk
Re: Hoover H130E
We can test it for £5+vat http://www.emwelec.co.uk send it & we will call you
Re: Hoover HF7150m
Sounds like main PCB. Send it to us with note of fault for same-day repair £34.90+vat http://www.emwelec.co.uk
Re: Hotpoint hvl 211 washer
Send with model no. & fault for same-day test/repair http://www.emwelec.co.uk
Re: Hotpoint Aqualtis Dead
Send top & bottom boards for test. We will diagnose & repair same-day. Tony http://www.emwelec.co.uk
Re: wf220 hot
Sounds like main board – send it to us for test £5+vat inc return post. http://www.emwelec.co.uk
Re: Hoover hnl7166
send it to us for test £5+vat inc return post. http://www.emwelec.co.uk
Re: indersit wia111
In stock at £39.90+vat with eprom fitted and programmed up ready to fit to the machine. http://www.emwelec.co.uk
Re: Beko WMA765
£34.90+vat http://www.emwelec.co.uk
Re: Hoover VHD 8162-80
We can repair it – £34.90+vat inc return post. Tony http://www.emwelec.co.uk
Re: HVR Nextra HNL7166 totally dead.
Send it to us for test ! It’s quite a common fault. We can normally repair it for £34.90+vat http://www.emwelec.co.uk
Re: Indesit Test Tool
Once again, I repeat, the smart card reader is really a waste of money and time. UNLESS…. you have access to lots of very cheap brand new unused Hotpoint/Indesit boards. Even then, you are going to have to buy a new card for every board you program. So, add it up. How much is a brand new unprogrammed board ? Then add on the cost of a smart card (you will need a new card everytime you program). Then add on the cost of buying the smart card reader. There are people who say that programming any old broken board will bring it back to life. Of course this is nonsense. 95{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} of the boards that we receive need other work (resistors, triacs, capacitors etc) and only then do we reprogram them. Then there are lots of variations on the boards themselves – differences in relays, sockets, triacs, edge connectors etc. It really is a minefield and we at EMW have spent hundreds if not thousands of hours on researching all the variations and compatibility issues. I know it sounds like a sales pitch, but really, order from us and it’s all done for you. Correct board, correct program on the eprom and fully tested. Misdiagnosed ? All it costs is £5+vat to send it back. A lot less cash and hassle than experimenting with smart cards when the odds will be hopelessly against you.
