Forum Replies Created
-
Posts
-
Re: EMW, 6 MONTHS,NOW NOT 12?
Problem we have, is putting a long guarantee on a poorly designed product. Our policy is to use better quality components to give a longer life but nothing can be done about the problems of mains voltages millimetres apart on an edge connector. Even Hotpoint only guarantee their repairs for 3 months. It is true that quite a few of our prices have increased (not all – more than half still remain the same) but we have held many products at the same price for over 10 years. Even we have to live in the real world where our costs increase every year (wages, power, postage etc). You will note that the cost of returning an item unwanted remains at £5+ vat ! Tony
Re: Indesit Smart Card Reader
There are approx 60 very common DIFFERENT models for these series of machines (WF000, WF100, WF200……. WIL103, WIL113 …….WD420, WD440…WIDL102…WIDL126 etc etc) – are you guys really going to carry 60 different smart cards ?? If you look at the whole model range, there are 100’s of models. Here at EMW, we set the board up for you – no need for those smart cards that only work once !
Re: Indesit WI141 Its got me beat!
Don’t forget to remove small plugs (blue wires) on board, nip with fingers (not pliers) and push back on. This can sometimes sort this problem
Re: hotpoint washer dryer mod wd62
Jim, I am talking about the hybrid unit. The dryer power circuit switches inside the timer burn more than any others.
Re: Smart Card reader – you don’t need it !
We can only reprogram these to the standard basic model – ie the one without LEDs indicating 15mins 30mins etc.
Re: hotpoint washer dryer mod wd62
Could also be switches burning inside timer, very common on this unit producing voltage surges. Try another timer and wait 3 weeks before returning ex unit so you are sure it has solved the problem.
Re: merloni modules/eeproms
The smart cards are definately ‘write-once’ and generally for use on a new indesit/hotpoint board. If you add together the cost of the 2 and bear in mind that modules don’t always solve the problem, it’s an expensive experiment ! When we charge £39.90+ vat inc eprom already programmed with the option to return the module for £5+vat if it doesn’t sort your problem, then I think these new smart cards are strictly for cash-rich madmen.
Re: hotpoint 95 series no spin fault
Quite a common timer fault – we still stock them £29.90+vat Just need 904/2199 …. Tony 0115 9652118
Re: wf240 fault code problem
F08 heater relay fault can also be a burning pressure switch, so change it for a NEW one.
Re: Hotpoint/Indesit Hardware Key.
If anybody has a hardware key, then we are looking for a spare. Could give £40+vat as a credit on your account here at EMW. Tony 0115 9652118
Re: zanussi fs1155w 914791165 00
We repair these boards for £39.90+vat inc return post. Tony 0115 9652118
