Tony_EMW

Forum Replies Created

Viewing 15 posts - 46 through 60 (of 138 total)
1 2 3 4 5 … 8 9 10
  • Author
    Posts
  • July 20, 2007 at 4:47 pm in reply to: Hotpoint WT960G #221403
    Tony_EMW
    Participant

    Re: Hotpoint WT960G

    Interlock short or motor fault are very common causes of dead board. Send it to us for test/repair. 01159652118

    July 8, 2007 at 10:01 pm in reply to: Indesit WIA101UK #220128
    Tony_EMW
    Participant

    Re: Indesit WIA101UK

    We stock these boards £39.90+vat 0115 9652118

    June 27, 2007 at 10:04 pm in reply to: Philco N1042X Does Nothing! #218375
    Tony_EMW
    Participant

    Re: Philco N1042X Does Nothing!

    Board in stock at £34.90+vat 0115 9652118

    June 23, 2007 at 11:09 pm in reply to: indesit widl126s #218211
    Tony_EMW
    Participant

    Re: indesit widl126s

    We will test it for £5+vat ! 0115 9652118

    June 19, 2007 at 10:40 pm in reply to: Hotpoint WD420 No spin #217566
    Tony_EMW
    Participant

    Re: Hotpoint WD420 No spin

    May well be a board fault. Send it to us with a note of the model number for same-day test £5+vat. Tony EMW, The Barn, Millfield, Oxton, NG25 0TD Tel 0115 9652118

    June 4, 2007 at 3:51 pm in reply to: Indesit WIA 101 module? #215648
    Tony_EMW
    Participant

    Re: Indesit WIA 101 module?

    We do stock these boards at £39.90+vat

    May 22, 2007 at 10:01 pm in reply to: hotpoint wf860 #214392
    Tony_EMW
    Participant

    Re: hotpoint wf860

    This display in stock at £29.90+vat inc postage. Tony EMW 01159652118

    April 27, 2007 at 7:59 pm in reply to: Zanussi timer-turns but no final spin #211982
    Tony_EMW
    Participant

    Re: Zanussi timer-turns but no final spin

    Classic fault on this unit. In stock at £39.90+vat. Tony 0115 9652118

    April 23, 2007 at 8:53 pm in reply to: Ariston Margaritta Eeprom #211497
    Tony_EMW
    Participant

    Re: Ariston Margaritta Eeprom

    I am puzzled. Who tested the board and diagnosed an eprom ? It’s pretty rare to find boards that just need eproms to put them right. I suspect the wrong eprom. Send it to us and we will test it AND read the eprom to make sure it is the correct one. Tony EMW 01159 652118

    April 17, 2007 at 8:55 pm in reply to: Indesit W103uk #211071
    Tony_EMW
    Participant

    Re: Indesit W103uk

    Sounds like not detecting motor. Could just be low carbons.

    April 8, 2007 at 8:34 pm in reply to: Zanussi ZWF1221W #210250
    Tony_EMW
    Participant

    Re: Zanussi ZWF1221W

    Classic fault this. Probably interlock shorted out board or possibly pump melted and damaged board. Send it for test/repair. Tony EMW 01159652118

    March 20, 2007 at 4:34 pm in reply to: ariston margarita a1635 #206926
    Tony_EMW
    Participant

    Re: ariston margarita a1635

    We charge £5+vat to test any board and that includes first class return postage ! Send it to us – I am fairly sure the board will be at fault. You can reclaim the QER test fee. No disrespect to QER but I don’t think they have the full gear to test / repair these. Tony 0115 9652118

    March 18, 2007 at 10:06 pm in reply to: ariston margarita a1635 #206923
    Tony_EMW
    Participant

    Re: ariston margarita a1635

    This sounds like the classic board fault – groggy wash but spin ok. Who tested the board ? Call us on 01159652118 if you want to try a module – I think this will sort it out ! Tony

    February 12, 2007 at 10:48 pm in reply to: Beko WMA 1715S #204065
    Tony_EMW
    Participant

    Re: Beko WMA 1715S

    John send it to us for repair – £34.90+vat
    Tony

    February 1, 2007 at 10:25 pm in reply to: WF860P F03 FAULT CODE #202533
    Tony_EMW
    Participant

    Re: WF860P F03 FAULT CODE

    David, we can test it for £5+vat. At least you’ll know for sure if it’s the board or something else. Tony EMW 01159652118

  • Author
    Posts
Viewing 15 posts - 46 through 60 (of 138 total)
1 2 3 4 5 … 8 9 10