Forum Replies Created
-
Posts
-
Re: ESS Multi Assistance UK
Hi
I signed up with them about 6 or 7 years ago , still waiting for them to send me my first job.
MikeRe: No Spin on Servis M9713
Hi
Have you checked the filter , if filter is blocked machine will not spin.
Mike
Re: Beko WMA 510W
Hi
Out of balance part of software is set too sensitive . also check mains voltage at PCB if it is too low this will cause problems .
Mike
Re: White Knight T/D Door Asy
Hi
Just looked on Crosslee parts list
Part no 421309236101 silver, on connections is £46.56 trade
Mike
Re: Beko D2731FW Dishwasher
Hi
What detergent are you useing ie:- 3in1 or 4in1 tabs or loose powder.
Mike
Re: Electrolux Fridge Freezer – Fridge Problem
Hi
Your a bit late with an answer to this if you look at the date of previous posts they were from 2005
Re: Bosch WVF2402GB/01 Kick plate retainers
Hi
Just checked on BSH site that model comes up ok
Base panel 289635
Holder 066788You need to look at picture to make sure of correct part
Mike
Re: Hotpoint DWF 33P/41
Hi
Thats how its supposed to work , Diverter in heater assembly controls the water flow .
Mike
Re: Hotpoint BF41 : Help!! Son put fliquid in!!
Hi
The water they mean is in the base underneath the machine not the water inside of machine
Re: Beko WMA1512s – module
Hi
Its on Connections/Electrue
Connect part no is 5031689062244 £51.00 trade srp £70.50 cant find it anywhere else , the number should be on original module.
Mike
Re: Hoover TV20 Not Heating up
Hi
Heater assembly comes complete , this is the only way as Penguin45 says.
That way you get any updated parts.
Hoover do not supply individual items for the heater assembly.You’ll find it here:
http://shop.ukwhitegoods.co.uk/product_ … cts_id=292Re: Hoover TV20 Not Heating up
Hi
Opening the door while TD heater is on causes thermal fuse to blow, this is because when the fan stops and with no air is being blown over the heater the air above the heater is hotter than normal, so thermal fuse blows. If you need to open the door before machine finnishes you should set it to the cool down period for 5mins . Opening the door before cool down is the most common reason for thermal fuses to blow. The best way is not to select too long a drying time in the first place.
Re: Miele Pyro oven
Hi
The Sabbath setting is for Jews who are not allowed to use or switch any appliance / switch or use other things on the Sabbath . So on the cooker it has to switch on the day befor the Sabbath.
Mike
