Washman

Forum Replies Created

Viewing 15 posts - 676 through 690 (of 894 total)
1 2 3 … 45 46 47 … 58 59 60
  • Author
    Posts
  • December 7, 2006 at 7:36 pm in reply to: servis caress 900 washer dryer #197298
    Washman
    Participant

    Re: servis caress 900 washer dryer

    Hi

    Whats the model number it should be M****
    and serial number

    Mike

    December 6, 2006 at 1:07 pm in reply to: Servis M6135 #197071
    Washman
    Participant

    Re: Servis M6135

    Hi

    I have had a similar problem and found that it was the edge connector on module not making good contact ,so now I always squeeze connectors to make better contact.

    Mike

    November 20, 2006 at 3:54 pm in reply to: How wide is a Hoover Logic #195910
    Washman
    Participant

    Re: How wide is a Hoover Logic

    Hi

    According to 1991 Hoover service product data book
    the Logic is 58.5 cm which is 23″

    Mike

    November 13, 2006 at 4:06 pm in reply to: Samsung P1253 Washing Machine Stopped Spinning #195227
    Washman
    Participant

    Re: Samsung P1253 Washing Machine Stopped Spinning

    Hi

    Are you getting an error code at end of cycle ie- ” UE ” in display which is out of balance.
    Some error codes are in the user manual

    Mike

    November 11, 2006 at 2:10 pm in reply to: BRANDT UPRIGHT FRIDGE / FREEZER – BREAKDOWN?!?! :-/ #192894
    Washman
    Participant

    Re: BRANDT UPRIGHT FRIDGE / FREEZER – BREAKDOWN?!?! :-/

    Hi

    Check the door is closing correctly

    Mike

    November 11, 2006 at 1:59 pm in reply to: Servis dryer fan not working #195027
    Washman
    Participant

    Re: Servis dryer fan not working

    Hi

    Model Number will start with M2

    Mike

    November 7, 2006 at 4:37 pm in reply to: Hotpoint 6240B Motor #194561
    Washman
    Participant

    Re: Hotpoint 6240B Motor

    Hi

    It depends on which timer is fitted digi motor is for 415 type controler,analoge for the other type of controler

    mike

    November 6, 2006 at 3:03 pm in reply to: MFI DIPLOMAT OVEN #171770
    Washman
    Participant

    Re: MFI DIPLOMAT OVEN

    Hi

    The best option would be to buy an oven with an all metal door then this would not happen. Glass breaks so needs to be treated carefully.

    Mike

    November 6, 2006 at 2:52 pm in reply to: servis caress 1200 door seal? #194456
    Washman
    Participant

    Re: servis caress 1200 door seal?

    Hi

    The spout has a flange with a groove , if you have put the glue ie:- debor/evostick in this groove and pushed one part of the flange into the drum so that one side of flange is on the inside of drum and one side on the outer side it should be Ok.

    Mike

    November 3, 2006 at 9:16 am in reply to: ISE washers #194192
    Washman
    Participant

    Re: ISE washers

    Hi

    They are made for UKWHITEGOODS so they should be.

    Mike

    October 25, 2006 at 11:15 am in reply to: VAT De-registration #193216
    Washman
    Participant

    Re: VAT De-registration

    Hi

    Just heard from local filling station, that from next january only proper invoices for fuel will be accepted by the vat man, till receipts will not be accepted. So you will need an account with garage or use a fuel card.

    Mike

    October 23, 2006 at 3:28 pm in reply to: DIPLOMAT APL 8332 DISHWASHER SPLIT HOSE, HELP ME!!!!!! #193016
    Washman
    Participant

    Re: DIPLOMAT APL 8332 DISHWASHER SPLIT HOSE, HELP ME!!!!!!

    Hi

    Change the pump for the one shown on connections, as the askol pumps impellor usually fall off . It’s a straight forward swop and will take just as long as changing hose , if it was available.

    Look here http://www.ukwhitegoods.co.uk/modules.p … ic&t=18777

    Mike

    October 21, 2006 at 3:02 pm in reply to: The right carbon brushes for AEG Lavamat 6450? #192950
    Washman
    Participant

    Re: The right carbon brushes for AEG Lavamat 6450?

    Hi

    No if the comm is damaged you will need a new motor, pushing a segment back would not work.

    Mike

    October 20, 2006 at 11:12 am in reply to: servis door interlock #192775
    Washman
    Participant

    Re: servis door interlock

    Hi

    The only part no I can find is 530000301 on the servis tech info hope that helps

    Mike

    October 18, 2006 at 4:13 pm in reply to: Bendix Autowasher 1000 Deluxe – door problem #192556
    Washman
    Participant

    Re: Bendix Autowasher 1000 Deluxe – door problem

    Hi

    Full model number would be a help and serial number

    Mike

  • Author
    Posts
Viewing 15 posts - 676 through 690 (of 894 total)
1 2 3 … 45 46 47 … 58 59 60