[Washman]

Re: AEG double oven smoke and noise

Hi

Are you sure the smoke was coming from control panel .On first use elements will smoke ,because they are coated to stop them rusting when new and all new elements will smoke the first time. and cooling fan can pull smoke from vents in the oven.

Mike

[Washman]

Re: EUROLEC FAN OVEN ELEMENT

Hi

Anyone out there please

Mike

[Washman]

Re: New Fridge/Freezer slow to cool

Hi

What temperature was the food that you put in fridge freezer. and you should have let the appliance get down to temperature before you filled it up. If the food was warm then the appliance will struggle to get down to correct temperature.

Mike

[Washman]

Re: LG WD1255FHB Banging when spinning

Hi

He means that if the machine is only meant to have two springs they will opposite each other in the middle of each side. If it is meant to have three springs there should be two springs on one side of drum and one on the other. If one spring is missing from from the side that should have two then the drum will hang wrongly, and the drum will not be balanced correctly.

Mike.

[Washman]

Re: Samsung Q1433 Washing Machine

HI

Has all the water gone from machine, and have you checked the filter.
And is there any other fault code showing.

Mike

[Washman]

Re: Service washer/dryer M9813 (Dryer problem)

Hi

You need a new air duct cover P#720256100 comes complete with fan.
The screws can be a pig to remove and duct needs to be be resealed on reassembly. Also make sure you clean out all fluff.

Mike

[Washman]

Re: Samsung Q1435 Error H1. Will only do quickwash.

Hi

We are here to help you if we can.
Let us know how you get on,feed back is useful.

Mike

[Washman]

Re: Beko WMB10W

Hi

Went to one yesterday that had been moved by flooring people ,hoses had been reconnected wrong way round so boiled everything becuase it rinsed in very hot water from hot water tank,so it had shrunk to loads of washing.

Mike

[Washman]

Re: Samsung Q1435 Error H1. Will only do quickwash.

Hi Penguin45

I was just about to reply but you got there first.

Mike 😆

[Washman]

Re: hotpoint WD440 Washer Dryer

Hi

Its a condensor dryer ,so needs water to condense the steam given off by the drying. All washer dryers are condensor types.

Mike

[Washman]

Re: Samsung Q1435 Error H1. Will only do quickwash.

Hi

HE or HE1 is a temperature or heater fault. So if water not heating a new heater is required.

Mike

[Washman]

Re: Servis t/dryer belt failure.

Hi

Its a common Fault on these. Elasticated belt with a lot of tension on it.

Mike

[Washman]

Re: beko

Hi

Flashing pre wash LED or flashing start/cancel button on WMA1715 BEKO

Turn power off (not at wall )
Select 90 degree wash
Press start and cancel button down at same time for 3 seconds and turn power button on whilst still holdingbuttons down– Start light will flash.
Leave power on
Select any spin position
Press start and cancel button at same time again for 3 seconds–other buttons may flash-if they do press start and cancel buttons again for 3 seconds
machine should be reset ready for use

Mike

[Washman]

Re: Servive M9813W

Hi

How old is this machine if still under guarantee give Servis technical a ring
They are usualy very helpfull

Mike

[Washman]

Re: Beko Fault

Hi

If you look in the user manual about page nine I think it will tell you about timer advancing. The timer is acting as a program selector switch for module which controls most of the functions.

Mike

[Author]

Posts