[Washman]

Re: Samsung RS21JCSV

Hi

His insurance wont pay . The only insurance that will pay would be if you have break down cover insurance your self.His insurance will only be for public liability.

Mike

[Washman]

Re: Overflowing Hotpoint Aquarius FDW60

Hi

What tablets are you useing 3 in 1 / 4 in1 these can cause problems with over foaming

Mike

[Washman]

Re: service wmwd m6012w

Hi

Thermistor should be 5KOhm at 25degrees

Mike

[Washman]

Re: service wmwd m6012w

Hi

M6012W This machine has a thermister
Had one the other day customer complained it was shrinking clothes because to hot . Found that the flooring people had moved machine and connected hoses wrong way round.

Mike

[Washman]

Re: Pressure chamber AEG favorit 875i

Hi

If manufactureres kept parts for every model they had made in the last twenty years they would need very big warehouses . And parts kept ,cost money to store . And no one can afford that.

current AEG’s look positively Zanussi-ish

Thats because they are part of the same group ie:- Electrolux

Mike

[Washman]

Re: Samsung Q1235s

Hi

3E is a motor related fault which is why it fills and empties but no motor action. so could be motor or control module fault.

Mike

[Washman]

Re: whirlpool dishwasher

Hi

Machine is overfilling if water gets to bottom of door. So engineer time to sort it out.

Mike

[Washman]

Re: on/off button broken on my Hoover Ultracare condeser dry

Hi

The button is not ment to stay in ,it is only a contact switch it will be the hold relay pcb that is faulty.

POWER OFF IF REMOVING ANY PANELS

Mike

[Washman]

Re: Servis Washing Machine Query Please Help!

Hi

The hole should be there it connects back on to wash tub to drain water away from door seal.

Mike

[Washman]

Re: Problems with drive on Hotpoint WMA 32

Hi

Replace with new belt and try, once they ride over the rim they are distorted.

Mike

[Washman]

Re: SERVIS M6011-1

Hi ally

They will do repair under guarantee from serial no if you contact Servis, and serial no starts with 2006 also state it was a prezy.

Mike

[Washman]

Re: Problems with drive on Hotpoint WMA 32

Hi

If you hold top and bottom of drum pulley is there movement, because it sounds as if your bearings are shot which will make the drum tilt foreward so that the belt will allways move to front of pulley.

Power off for safety sake
Mike

[Washman]

Re: SERVIS M6011-1

Hi

Servis Part no 518008400 this machine must be only 6 months old with this type of pump, so would still be under guarantee whats the serial no first 6 digits are year an week of manufacture.

Mike

[Washman]

Re: Intermittent fault with Parkinson Cowan stove

Hi

You need a CORGI registered engineer, they are the only ones allowed to service gas appliances.

Mike

[Washman]

Re: SMEG SUK91MFX – fan elements not heating

Hi

Only way is to check with a multimeter on the elements.

POWER OFF FIRST PLEASE.

Mike

[Author]

Posts