Forum Replies Created
-
Posts
-
Re: HOOVER HNC 382T I need A lesson Please
i replaced a capacitor on one of these a few days ago, i found it easier to take the screws out from the right side them you can just about get access to the capacitor, it is a fiddly job. everything is done from the front so no need to remove circlip
Re: work car or van
ive got a fiat scudo 1.9d had it for 9 years done over 100,000 miles, great size for good stock of spares and can easily get 3 appliances in it plus average 30-35mpg
Re: hotpoint hood model he62x
you will find that every time a bulb blows it will also blow the pcb-great design!
Re: Work Up For Grabs
i still cannot work out how to put my details on your system, can you explain how to do it, i have looked on main menu and user menu but nothing there
Re: Safety testing. Do you think this is over the top?
i take it you work for british gas if your expected to do all these tests
Re: Indesit IWB5123 Washing Mach: How to put door seal back
put the seal and spring clamp in hot water first and put some washing up liquid on the lip of the seal that attaches to tub/tank, also on the spring as it lubricates it making it easier to fit. The spring is fiddly but it will go on
Re: Estate agents asking for 30 days invoice
i have had a few estate/letting agents that also want 10{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} of the invoice total paid to them as commission. It bumps the price up a bit but they accept it.
Re: DeDietrich Dishwashers???
i saw a built in washer dryer branded dedietrich and it had the familiar split cabinet electrolux/zanussi
Re: Estate agents asking for 30 days invoice
i deal with lots of estate agents and most of them have a 30 day invioce time, the reason i was told is because they have to have the rent paid into their account first and this could be any time up to 30 days. I have worked this way for years without any of them scamming me.
Re: Fault with Neff Induction hob
maybe a fault with the power board or sensors, these are very expensive to repair, your model is 5 years old and cost approx £900 to buy a new one. best left to BSH engineers
Re: Indesit IWDE 12UK 80523900000 removing condenser?
you need a long screwdriver to undo the clip, not that difficult, i have cleaned out a few of these, once everything is lose it slides out
Re: Indesit WIL 113 LED1 Error Code
the heater relay is on the main module and will normally work ok on the wash but fails to de-energise properly so causing the F08 fault when it gets to rinse. replacing the module or the relay on the module should cure the fault
