Forum Replies Created
-
Posts
-
Re: Cost of Neff Baskets
look out for scrap bosch/neff/siemens dishwashers, i often remove old dishwashers to fit new ones and take old one away for scrap
Re: AEG EME0251 Hob -regulator/simmerstat….
the only regulator with the pan sensor on qualtex site is a belling part number bel082617120
Re: ahhhhh the back of my beko has melted
if the wiring is not tightened correctly in terminal block when it was installed, this will cause it to melt. also make sure it has correct cable-6mm twin & earth
Re: Work Up For Grabs
it will cost £10 congestion charge and between £5 to £10 to park before you even look at the machine, not worth independants to work in congestion charge zone or west end of london, i gave it up years ago and never looked back
Re: Hotpoint eg94x freestanding cooker.
yes it will need programming with a smart card. a great example of an over engineered appliance that only hotpoint/indesit engineers can repair.
Re: BEKO DRCS76B 7KG CONDENSER
according to the technical info if the belt snaps then the drum and front felt bearing have to be changed as well? might as well scrap it-if i told a customer i would have to change these parts as well they would think i was trying to scam them!
Re: Indesit WM12XUK – Noisy motor
or you can file the correct profile on the brush, i do this quite often if they have the opposite profile
Re: BEKO DRCS76B 7KG CONDENSER
i have had a few of these and also the vented type snapping belts. Remove the drum and check front seal, the ones i have repaired were getting jammed somewhere on the front seal. The vented type i gave up on as it snapped 3 belts in a week, i removed drum twice and found no reason for it-just lost money on that one and it has put me off repairing them.
Re: Getting the ignition on a Diplomat hob repaired
it may be made by stoves,usually supplied with a new kitchen by mfi. the engineer needs to be gas safe registered to work on gas appliances, what area are you in?
Re: Why do some oven elements last longer than others
i have had loads of bosch ele2052 qualtex element blowing within 3 months of fitting, they always blow in the same place near to fixing bracket, also had other bosch/neff ele2042 and ele2044 not last long
Re: Miele G1180Vi all programme lights flashing
maybe the door seal has split. all accessed from the front
