Allsorts

Forum Replies Created

Viewing 15 posts - 871 through 885 (of 1,356 total)
  • Author
    Posts
  • in reply to: September 2011 UKW engineers meeting #348279
    Allsorts
    Participant

    Re: September 2011 UKW engineers meeting

    Hi Bryan,

    How would it fall against the Sept WTA /UKW Meeting.. Would it be the day after or?

    George

    in reply to: Now ASDA are at it. #339727
    Allsorts
    Participant

    Re: Now ASDA are at it.

    There is a little link at the bottom to post it to Facebook too 🙂

    George

    in reply to: How Washing Machine’s Changed The World #348049
    Allsorts
    Participant

    Re: How Washing Machine’s Changed The World

    leavemetogetonwithit wrote:Some of us would like you to go on .
    Mike.

    Here here!!

    Personally, I thought the guy was talking as much about environmental effects as about the washing machine.

    George

    in reply to: How Washing Machine’s Changed The World #348040
    Allsorts
    Participant

    Re: How Washing Machine’s Changed The World

    We also need to consider that a washing machine requires water… The world social services types are finding it hard enough to get water to some of these people to drink atm, never mind water for washing machines.

    in reply to: Panasonic M/wave NEC1275 #348081
    Allsorts
    Participant

    Re: Panasonic M/wave NEC1275

    Is it when they switch it on that the fuse is blowing or is the fuse blown before the unit is switched back on?

    George

    in reply to: How Washing Machine’s Changed The World #348033
    Allsorts
    Participant

    Re: How Washing Machine’s Changed The World

    I will have another look at it tomorrow when I am not so tired 🙂

    George

    in reply to: How Washing Machine’s Changed The World #348030
    Allsorts
    Participant

    Re: How Washing Machine’s Changed The World

    He makes sense too 🙂

    Allsorts
    Participant

    Re: Electric Oven gives off Smell of Burning Plastic or Chem

    I had a customer with this problem a few days ago, however, her oven was gas and was also brand new… The oven was taken back by Currys and replaced.

    Nevertheless, our usual advice to customers with similar problems is:

    “Open a window or two (for ventilation of fumes) in the same and/or adjacent room to where the appliance is housed.

    Ensuring there are no objects other than oven trays in the cavity, turn the offending appliance cavity to Max Temp. Once Max Temp is reached, continue at Max Temp for at least 15 mins thereafter.

    This process incinerates anything causing an odour.

    Stay out of the room containing the appliance whilst this process is ongoing. If the fumes remain after this process is completed, call an engineer.”

    George

    in reply to: Guinea Pig Time #347760
    Allsorts
    Participant

    Re: Guinea Pig Time

    kwatt wrote:

    K.


    Info is in the link above Ken 😀 or try here http://allsorts.bttradespace.com

    George

    in reply to: Ebuyer #347942
    Allsorts
    Participant

    Re: Ebuyer

    Yup.. Same as the ‘Clearence centre’ in Chester… and that belongs to DSGi (Currys).

    George

    in reply to: HOTPOINT VTD60G TUMBLE DRYER #347935
    Allsorts
    Participant

    Re: HOTPOINT VTD60G TUMBLE DRYER

    There were two different ones used but the main one was HPTC00142615

    The other which is less common is C00141694

    in reply to: Guinea Pig Time #347747
    Allsorts
    Participant

    Re: Guinea Pig Time

    bazza500 wrote:What’s a website? 😀

    Is it one of these? Allsorts Recycling Appliance Repair

    I’ll volunteer if you like but I already have the site above.

    George 🙂

    in reply to: AWM5145 / 5 door boot #347706
    Allsorts
    Participant

    Re: AWM5145 / 5 door boot

    Check the drum is not sliding back and forth in the bearing.

    George

    in reply to: Servis 1600 washing machine #345388
    Allsorts
    Participant

    Re: Servis 1600 washing machine

    oilyboy wrote:I decided to bin it and get a new one.

    Thanks to everybody for your help.

    Oilyboy

    Hi Oilyboy,

    Never bin the machine .. alway try to keep it out of landfill .. I’m sure an engineer near you would be very happy to take it off your hands and save you the tri to the tip.

    George

    in reply to: Waste management changes coming soon!! #347690
    Allsorts
    Participant

    Re: Waste management changes coming soon!!

    I think prevention is refering to preventing it entering the WEEE cycle… but we won’t know until these regulations become live… If I get the time I shall have a few words and see if I can get a definition.

    George

Viewing 15 posts - 871 through 885 (of 1,356 total)