Forum Replies Created
-
Posts
-
Re: hotpoint TDC60 stopped working
Check the microswitch lever at top of door, they can bend out of shape and even fall off
Sent from my iPad using Tapatalk HDRe: A Cautionary Tale
lee8 wrote:I wait patiently hoping for a day when stupidity & taking the pi§§ becomes illegal.
You won’t be able to post anything then 🙂
Sent from my iPad using Tapatalk HDRe: Lamona HJA8630 cycle stops before releasing tablet
When it stops kneel down and listen for a slight hum, if there is than you’re wash motor has had it. If not it could be a wiring fault in the door loom or a board fault
Sent from my iPad using Tapatalk HDRe: Lamona HJA8630 cycle stops before releasing tablet
Is there water in the base when it stops ?
Sent from my iPad using Tapatalk HDRe: customers with no common sense !!
Unfortunately this is all to common
Sent from my iPad using Tapatalk HDRe: Beko WM1512S Washing Machine not filling with hot water
On a 40 wash it will probably be a mixed fill, cold water pressure is higher than hot so it may feel cold coming in, try a hot wash to see if comes in hot, run the nearest hot tap 1st to get it running
Could be a faulty inlet valve if not
Sent from my iPad using Tapatalk HDRe: A Cautionary Tale
I’ve been to places where you just get a gut feeling that they would seize opportunities to get money out of you, quite often I’ll take photos of flooring, appliance damage etc before I start.
I learnt to do that after someone tried to get me for flooring just after I started on my own saying I had flooded her carpet, I knew damn well I hadn’tSent from my iPad using Tapatalk HD
Re: Beko WM1512S Washing Machine not filling with hot water
The water coming into the dispenser will be cold, it heats in the drum
Sent from my iPad using Tapatalk HDRe: Beko WM1512S Washing Machine not filling with hot water
The machines heats up to the temp the wash says. Nearly all machines are cold fill these days
Sent from my iPad using Tapatalk HDRe: indesit idl10suk.c 6440685 not heating
Pcb’s are prone to no heat faults, what do you mean by the element is live both sides?
And also the no earth part
Sent from my iPad using Tapatalk HDRe: Genuine part numbers CONNECT
If qualtex can supply parts for a certain price then why can’t connect, my orders from them have dropped dramatically over the last year but no one has contacted me to ask why, tells it’s own story
Sent from my iPad using Tapatalk HDRe: Lenor Unstoppables Great alternative to fabric softener?
Haven’t tried myself yet but they seem to have good reviews, although I always take them with a large pinch of salt
Sent from my iPad using Tapatalk HD
