Forum Replies Created
-
Posts
-
Re: CI555WH noise
I would check and see if the wire clip that holds the heater secure is in place, but you probably would have noticed when you had the heater out.
Re: Business Bank Account v Personal Accounts
That hardly makes it free when you have to pay over £100 to be a member of the FSB.
Re: Business Bank Account v Personal Accounts
I bank all my cash into my Nationwide Flexaccount and then write 1 cheque at the end of the month and deposit that in my business account.
I pay 1 cheque charge instead of 65p/£100.
Re: apm8552
I ordered the drum for this machine. It`s different from the original in that the orginal pully was held on by a nyloc nut but the replacement needs a bolt. I cannot see any reason why I cannot just fit a bolt as everythng else looks similar. Does anyone know any different?
Also the tub seal is completely different and will not fit. Anyone know if this is the correct part number or a packing error?
I ordered a bearing kit BRG4646 from connect which is the equivalent to BKT36 and although the bearings are right the bearing seal is too small. The one in the kit is 35X62X10. Anyone know the part number for the correct seal or the size it should be?
Model is APM8552 serial no. 20061503050-010103007-01 02
Thanks for any help.
Re: How to remove door panel – CDA CW494
The screws in line with the plastic bits that you can see have to be removed and then the door will slide off.
These screws look the same as all the others holding the door panel on.
Re: Hotpoint VTD20 tumble drier.
Lid off, Control panel off, Front panel off, Belt round drum, Pull like F&*^{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}, Get first aid kit, bandage hands and rebuild.
Re: Whirlpool washing Machine Mod AWO3761/S
neilsukwg wrote:Eliminated interlock by running machine on 2′ drain cycle. It will do that no problem.
.
It will do the drain cycle with the door open.
Re: henry broken?
Chop off the cable 6inches from the plug and refit the plug. That should fix it from the symptoms you describe.
Make sure the plug is out of the socket before you cut the cable. :zap:
Re: masterpart prices for SMG993736190R
Penguin45 wrote: I don’t mark up my parts and make my money on my labour.
:eeek:
Re: Belling format 645 Main Oven not Heating
99.9{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} chance of it being the element
