Forum Replies Created
-
AuthorPosts
-
BobHope
ParticipantRe: Frost Free Candy Fridge-Feezer: Fridge Not Cold Enough
Hi Kev,
Your candy appliance is not a true frost free, in that it uses a cold wet wall with an evaporator behind it to cool the fridge compartment, its engineer time i am afraid as the symptoms you gave sound as if the system is short of refrigerant.try looking in the repairs section for a local engineer.
Cheers Bob
September 7, 2005 at 8:27 pm in reply to: Candy frige freezer, back of outside pipe gets frost #146895BobHope
ParticipantRe: Candy frige freezer, back of outside pipe gets frost
Hello Mrs R.
please do not release any of the refrigerant and contact the dealer you got it from and Point him to this site.
dont be to alarmed that the fridge is overcharged, but please get it checked ASAP and make sure refrigerant is reclaimed and not allowed to mix with air as that is when he explosive problems are an issue.
help and advise is allways avialable on the site.
cheers bob.
BobHope
ParticipantRe: Hygena AHY8102/1 Dishwasher
Thanks Dave.
Bob. 😀BobHope
ParticipantRe: Skype
hi Phidom
it works fine on win98 and ME.Cheers Bob.
BobHope
ParticipantRe: Bosch WFF2001GB/01 FD 800100295
Thanks Dave will price a motor up for the customer tomorow.
Cheers Bob.
BobHope
ParticipantRe: Van Insurance
there worse than my local lad Dave 🙁 £500. still looking any more sugestions lads
August 16, 2005 at 7:29 pm in reply to: I need the serial number for the ignis larder fridge arl100 #145075BobHope
ParticipantRe: I need the serial number for the ignis larder fridge arl
hi
your appliance is not a whirlpool, please post the numbers that start with SC and i will look up the service agent for Serena.Cheers Bob.
BobHope
ParticipantRe: Scaiola cake display (4 glass sides)
Hi Howie
try derbyshire refrigeration, tel 0115 930 8022 part no. fmp025.
blade size 300mm diamater 900rpm 45watts fully encased in motor and blade guard.hope that helps. 😀
Cheers Bob.
BobHope
ParticipantRe: white k knight dryer model no cl 767
Hi,
look round the back of the appliance there should be a red reset button try pressing that first, if it has tripped check for a blocked filter and condenser.hope that helps.
Bob.
BobHope
ParticipantRe: Servis M3114
gen 518004300
518007600connect pmp952
qualtex pmp87
easy to obtain used on lot of models.
😀 Bob.
BobHope
ParticipantRe: MAYTAG T/L
Hi M
change the snubber and fit the new stronger springs, be carefull when fitting the snubber as it has a 200lb spring that has to be loosened to gain access.Cheers Bob
BobHope
ParticipantRe: maytag neptune
Hi Stu123,
welcome to the site,
will have a look to see if i have that tech info in the morning, Maytag is a nightmare for tech info. 👿Cheers Bob.
July 18, 2005 at 7:11 pm in reply to: Hoover AM120 express 37615986 02064050 Timer Clicks Round #141816BobHope
ParticipantRe: Hoover AM120 express 37615986 02064050 Timer Clicks Roun
Hi Pat.
just to ask if you done an insulation test on the heater and the motor as i have had a few of these that show strange random faults and its been down to earth leakage (but not enough to trip RCDs out).Cheers Bob.
BobHope
ParticipantRe: Servis M4605W
Hi Paul,
i had the same problem with one of these machines on the second visit i fitted a nes PCB and it cleared both faults.Cheers Bob.
BobHope
ParticipantRe: Hoover AL 130 SIX SPORTSWEAR 1300 (37615952)
Hi Mike,
the only problem i have seen with this appliance is corruption of the processor , the display then just lights up every didgit, remove the top and on the display panel if you are lucky you wil see a reset switch if you are not its just two shorting links to reset the prosessor , failing that its the pcb.hope that helps
Cheers Bob. -
AuthorPosts
