Forum Replies Created
-
Posts
-
Re: Baumatic BT904 ss double oven not getting up to heat
Just a thought Alan , are you 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} sure the main fan oven motor in the middle of the circular element is running at full speed all the time.
Also is it since the fan oven element was replaced that you`ve had these problems ❓Bryan
Re: Recommended Listening
Just to lighten the mood a little tonight 🙂 I enjoyed this new song from the former Verve front man . http://exodus.interoutemediaservices.co … ery=stream
Re: diy’ers
Yeah , agree with that in general Jeremy but don`t worry Martin`s getting his revenge on a DIY`er by getting him to take the rear casing off a Zanussi to have a look at the brushes 😆 .
Bryan
Re: Servis S900
Thanks for your help lads :tup: and I`ve actually got that belt in the van 😯 .
Bryan
Re: Servis S900
Ok thanks Dave , if you type “SERS900” into Connect global search you get 40 or 50 parts listed but not the belt of course 😥
Customer tells me it was supplied from MFI with their kitchen but its not an integrated model.
Bryan
Re: IND KD641E
I`ve just checked those part numbers on Connect website and they come up , but special order. 🙁
Bryan
Re: Odd Bosch fault!
Seems a bit strange that Martin , if it was loosing its neutral supply how was the pump still running 😕
Bryan
Re: Hygena Oven APL3326
Thanks Craig , I`ll phone customer with price before checking availability from MFI.
Bryan
Re: SEME & Qualtex
Bryan wrote:small elephant medium elephant
Well , I was close 😳 😆
C`mon then Bob tell us the story :).
Bryan
Re: SEME & Qualtex
Dave_Conway wrote:
Just out of interest, does anyone know what SEME stands for ? (I do but it’s never been confirmed), as a tip look at their logo 😉Dave.
Someone once said to me it was small elephant medium elephant and I thought it was a wind up but now I`ve looked at the logo (which I`ve never noticed before) I guess it`s right.
Bryan
Re: undissolved tablets
A K mclardy wrote:
The tablets are”Ariel” and they were ok up until several weeks ago. The area where I live is in the Central Scotland Region. the pressure is ok. Could it be the temperature of the water? as the ambient temperature has dropped quite a bit, and the machine is a cold fill type.You might want to try completely removing the drawer and cleaning the water outlet holes on the dispenser roof. These can become slightly blocked and restrict the flow of water into the drawer. At the same time give the drawer a good clean.
If that doesn`t work you may well be right about the ambient temp. of the water.
Power off for safety please.
Bryan
