Forum Replies Created
-
AuthorPosts
-
September 25, 2010 at 8:03 pm in reply to: O Clipes for Dishwashers and Asko / ISE 10 Washers #331281
burns
ParticipantRe: O Clipes for Dishwashers and Asko / ISE 10 Washers
Hi Bob,
Do they crimp on the sides as well as the ends though?
The alternatives I have found dont..Cheers Bob.
burns
ParticipantRe: WTA / UKW SEPTEMBER 2010 MEETING
Good Meeting, Sorry Ian didnt locate you. I saw the back of your head at one stage then lost you again.
Thanks to all concerned. Appreciate all your hard work.
Burns : 😆
burns
ParticipantRe: September 2010 Meeting
To All Concerned:
Thanks for a good meeting. It was good to put some faces to names.
Fantastic turnout.Cheers. 😉
burns
ParticipantRe: famous customers?
funkyboogy wrote:michelle mone ultimo bras . etc on that 71 degrres north prog
went from nothing to multi millionare..very nice ( think she was a model as well ) … caple wine chiller ouch
oh and this scottish writter ive never heard of her ….whats it
jk rowling (edinburgh) city property when shes in the capital
… think she wrote a couple of plays or something …
very nice and very down to earth …ally
Been There for a Maytag washing machine. Tony Blair and Gordan Brown and Duke of York all Maytags. Turned down Jordans and Cheryl Cole. Too demanding
burns
ParticipantRe: Service Call LL49
Sorted now. Thanks Guys….
burns
ParticipantRe: Indesit washing machine explodes
Bet Excalibur is now in a neck brace and claiming Whiplash…. :rolls:
burns
ParticipantRe: setting time on siemens wm
Hi Press any wash programme. when it shows that menu. It shows the time left. Press the third button on the left . This will put you into the time menu. You can then select the correct time and winter or summer.
One of my favourite machines 😆burns
ParticipantRe: September 2010 Meeting
Just to Let you all know if you havent already. The Hilton is no longer taking bookings on that rate. No rooms available it states.
However the Innkeeperslodge (Chain) nearby are still offering prebooked for £35. Im use to slumbing it. 😥burns
ParticipantRe: Admiral AC 2224 GEKB F/Frez
Hi.
Something has gone wrong here, It sounds like they have sent you boards for the older Amana XRSS. What you need is the Control board http://lookup.partadvantage.com/lookup/maytag/6153/00040394#Its located in the top of the fridge section and can be removed by three or sometime four screws into the roof.
There are three types currently available, you can identify then by the sticker on the board. Jazz 14 – 15 and 16
For some reason there is a big price difference. The jazz 14 is half the price of the other two.
If you need any more info go to:- http://www.servicematters.com and click on the tab for old Maytag service library. You can then input the model number and get tech info.
It will need programming, but depending which board, the code is on the rating plate inside the fridge. This is shown as code. If all else fails code 05 works pretty well.
Either way these will be much cheaper than what you have been sent if theyve invoiced for the boards youve been sent. :rolls:burns
ParticipantRe: Anybody wanna buy a washing machine factory?
Looking at these pictures makes me feel quite sad, Ive walked around that factory many times and each time there were less and less workers. It really is sad to see it being raffled off like this. That said I thought it would have been broken down and flattend long ago.
This week I think I will do the lottery with the old Hotpoint numbers.
that came from there… You never know. (well actually I probably do) but if they come up a few million could get it running again9534w – wm13 – Theres my six.
burns
ParticipantRe: capacitor
Hi I am of the same opinion. As long as the working voltage is higher than the original it will be OK, the important one is the capacitance rating.
June 17, 2010 at 9:43 pm in reply to: Amana XRSS267BW – Dispenser control panel, light blink #321886burns
ParticipantRe: Amana XRSS267BW – Dispenser control panel, light blink
This is a faulty dispenser board. What area are you in I am sure I can put you in touch with a suitable Amana trained engineer…
burns
ParticipantRe: Ikea (Whirlpool) DWF 416 Rubber Bung
See PM
burns
ParticipantRe: repairmanacademy.com
Thinking of doing a promo video and using my four kids as props. Beats busking…… 😳
burns
ParticipantRe: Refrigeration gear?
Hi contact Pete Chitson of Vulkan Industries who supply lokring and all other equipment. Not used his number for a while but it was 077672258504. Bought most of the equipment for Maytag from him. Very obliging and will go through it all and train you in its use if required and of course you buy over a grands worth 😆
-
AuthorPosts
