Forum Replies Created
-
Posts
-
Re: Smeg oven model F67
cant find this as a model ; check timer first . ( often smeg ovens have a door micro that operates the cavity lamp so this may be a seperate issue ? )
other than that, agree probably selector switch …. full model will be handyRe: Whirlpool/Ikea DWF B10 fault
8 flashes indicates water level failure .
first and easiest thing to check is the filters – pay particular attention to the fine mesh tubular filter , and even if it looks clean, scrub with plenty of hot water .
in the sump where the filters cover, look for a black plastic grid in the right hand side ; an old toothbrush and plenty more hot water scrubbed on here and it may well give you a new lease of life 😆Re: Dent in Stainless Freezer Door
This might help ? http://cpc.farnell.com/duratool/d00215/ … dentpuller
I have had mixed results using mine , but for the price and lack of effort required , it maybe worth a go
agro wrote: i take technical queries serious
And so do we all …. which is why when I look for help , I try to give as much information and be as clear as possible . Surely it is easier to help those helping you than using playground slang and no punctuation ?
Re: They dont build em like that anymore – Part 20
that looks like a hotpoint twin tub unless i am mistaken ?
Re: AWO/D4505
It’s just that I had one in a garage this week with similar faults, and it was so cold there was ice formed inside the drum and on the bellows ; my inquisitive mind was curious as to wether the cold is affecting these, as I have had 3 or 4 whirlpool dryers all faulting due to low ambient conditions ( all outside ) and seemingly anything below 5 deg ambient, they wont run .
eddieRe: Whirlpool awod 4505 fault code
http://www.ukwhitegoods.co.uk/modules.p … 744#256744
just a thought…. 😀
Re: Thermal Lock Out
iadom wrote:Anyone had this affecting Whirlpool electronically controlled dryers. Just had a customer on the phone with one with all the lights flashing. Its in a garage and it went down to -10 here last night, still reading -08 on my car temp gauge.
Not been out to it yet so don’t have model number etc.
jim.
had a handful up here last few weeks jim, and apparently the handbook advises customer that if ambient temp is below 5, the unit wont run . hth
Re: Whirlpool AWZ456/IX
you need the sam device to re programme this chris… failing that the correct board has to be purchased ready programmed ( and re programming with sam doesnt always work either )
Re: Supplier of Captive nuts
i used to get these from rs components , cant remember the price, but if i bought them there they wouldn’t have been too dear :rolls:
