[clyde]

Re: Thermal Cut Outs on TDC62 (P/N 1701583) – new pair knack

It appears that having flippers makes you type faster! well beat on that post 😳

[clyde]

Re: Thermal Cut Outs on TDC62 (P/N 1701583) – new pair knack

docrob wrote: do I presume that the ‘solid’ slightly caved in state of that stat gives it away as blown, while the other one appears slightly bloated and has a little free movement

The “one shot” stat with the green spot on it will be caved in if it is open circuit (not working) the 1701583 kit will contain both stats – change them both! part available from ; http://shop.ukwhitegoods.co.uk/product_ … ucts_id=78

Check for blockages in the condensor and filter as fluff build up may of caused the stats to trip.

PULL THE PLUG BEFORE ATTEMPTING ANY REPAIR :zap:

Clyde 8)

[clyde]

Re: hoover tv630

Sounds like the relay is faulty to me part no 91201247 not sure on the price tho

Clyde 8)

[clyde]

Re: Dyson CR01

Bryan, how old is it? and if its new was it bought off the shop floor?

i’ve heard before that retailers sold their ex display models off – stuck in demo mode when customer first used it then dyson had to go out and put proply programmed pcb’s in them.

Clyde 8)

[clyde]

Re: Indesit Dishwasher error code A05

Its a problem with the wash motor – and needs a engineer to sort it out.
look in repairs@ for a local engineer; http://www.ukwhitegoods.co.uk/modules.p … whitegoods

Clyde 8)

[clyde]

Re: Indesit DI62

It sounds like your dishwasher may be leaking. you’ll find water in the base of the appliance.

Best to have it checked by an engineer – look in repairs@ for a local engineer

If you have a look through the rest of this forum at the indesit posts you’ll find this fault has been discussed before (same fault as A01)

If you decide to have a look yourself PULL THE PLUG OUT :zap:

Clyde 8)

[clyde]

Re: Creda TCR13 Condenser – Not heating?!

Yes replace them both – they are both supplied in the kit.

Also make sure there is no fluff blockages – check filter, door ducting and condenser as fluff build up can cause the stat to trip.

Pull the plug out before attempting any repair :plug:

Clyde 8)

[clyde]

Re: WASHERMACHINE DAINAGE

I take it you mean the standpipe that the washer outlet hose goes into????

If water is leaking over the top of the standpipe then you have some sort of blockage in your plumbing. If you can’t sort it yourself – call a plumber.

Clyde

8)

[clyde]

Re: Cooker trips circuit breaker

I think steve would have had his cooker sorted by now as his query was in january!

as for anyone reading this thread – DO NOT DISCONNECT THE EARTH WIRE on any appliance! :zap:

call an engineer to have it repaired and tested for electrical safety.

Clyde 8)

[clyde]

Re: Plane taking off in my washing machine !!!!????

Lets start with the make, model and serial number of your washer

Clyde 8)

[clyde]

Re: Dishwasher Indesit D63 – Doesn’t Open Detergent Dispense

Hi Martin

Its worth changing the dispenser part no C00075748 email spares@ukwhitegoods.co.uk if you want one

Pull the plug out before attempting any repair :plug: If you’re not sure look in repairs@ or pop up you’re postcode in here for a local engineer

Clyde 8)

[clyde]

Re: Hotpoint Aquarius DWF50 flashing lights – what do they m

Guyjan

This is a draining out problem – check filters and plumbing for blockages first-
if these are ok then the problem maybe a blocked pump. If your not sure of your abilities look in repairs@ or pop up your postcode in here for a local engineer.

If your going to have a look yoursel PULL THE PLUG OUT FIRST :zap:

Clyde 8)

[clyde]

Re: I have a electrolux dishwasher ESF 620

I meant the fill pipe to the back of the washer if it’s no different best to get an engineer to look at it.

Look in repairs@ for a local engineer.

Ps If you wait till tomorrow you’ll probly get more advice on here

Clyde

8)

[clyde]

Re: Which brand should I buy?

pwhite8314 wrote:
Washing machine
Don’t say Meile to me! Until they employ a designer that’s not living in the 80’s, I just can’t consider them, no matter how well they’re built.
Pete

If your bothered about the looks
Check out miele’s intergrated stuff http://www.miele.co.uk/

Clyde 8)

[clyde]

Re: HOOVER TC650

Colsy

You’re going to need an engineer to diagnose this fault have a look at repairs@ for a local engineer http://www.ukwhitegoods.co.uk/search/fi … ineer.html
or pop up your post code in here.

Clyde 8)

[Author]

Posts