colly

Forum Replies Created

Viewing 15 posts - 31 through 45 (of 83 total)
1 2 3 4 5 6
  • Author
    Posts
  • June 14, 2011 at 7:50 pm in reply to: Aeg fault E5H #353287
    colly
    Participant

    Re: Aeg fault E5H

    Hi all
    Turned out to be a blasted inverter board.

    At £102 plus vat not sure bout replacing it .

    Anyone had this before ?

    Seems to good of a machine to break up .

    Colly

    June 10, 2011 at 7:48 am in reply to: Aeg fault E5H #353286
    colly
    Participant

    Re: Aeg fault E5H

    Hi criscold
    Thank you for your reply .
    Inverter board is that the one on the bottom of chassis ?
    Or the one behind main fascia board ?
    Colly

    May 24, 2011 at 10:09 pm in reply to: Zanussi washing machine sticking on rinse #350421
    colly
    Participant

    Re: Zanussi washing machine sticking on rinse

    Sorry put the above info on wrong zanussi posting
    Please disregard

    May 24, 2011 at 7:39 pm in reply to: Zanussi washing machine sticking on rinse #350419
    colly
    Participant

    Re: Zanussi washing machine sticking on rinse

    Hi
    Went out and cleared blocked pressure tube.
    Machine seems to be working ok now had an e31 in display when on diagnostic.

    Colly

    May 24, 2011 at 7:34 pm in reply to: Hoover optima oph714d #351399
    colly
    Participant

    Re: Hoover optima oph714d

    Hi guys

    I fitted a new pcb today also a new door interlock.

    On removal of old pcb you could see a couple of blast marks.

    Machine now working fine .

    Colly

    May 16, 2011 at 1:17 pm in reply to: Hoover optima oph714d #351398
    colly
    Participant

    Re: Hoover optima oph714d

    Hi guys
    Thank you for your replies .
    I do keep the door lock in stock so was going to fit it on my return visit .
    I have already ordered a new mod £29 plus vat , not a bad price I thought .
    Will post when I have fitted them ,just to update post .
    Colly

    May 13, 2011 at 9:43 pm in reply to: Anyone got any Tech on this? #351359
    colly
    Participant

    Re: Anyone got any Tech on this?

    Can still smell that unique gearbox oil smell
    Colly

    May 13, 2011 at 9:41 pm in reply to: Anyone got any Tech on this? #351358
    colly
    Participant

    Re: Anyone got any Tech on this?

    Done this job for thirty years now.
    Been a long time since I saw an empress .
    I remember working on the odd one , did more with the countess model .
    I once collected the baby of the family known as the princess (only ever saw one of these).
    Ah when machines were worth repairing and worth reconditioning too .
    Colly

    May 12, 2011 at 9:12 pm in reply to: Bosch WAS28466GB/08 w/m Door Handle #348911
    colly
    Participant

    Re: Bosch WAS28466GB/08 w/m Door Handle

    Hi martin
    Thought it was something different .
    i deal with connect already
    colly

    May 11, 2011 at 10:10 pm in reply to: lg WM-1080FHD washer bearings #351047
    colly
    Participant

    Re: lg WM-1080FHD washer bearings

    Masterpart are listing an lg bearing kit for £9.99

    May 11, 2011 at 8:30 pm in reply to: Bosch WAS28466GB/08 w/m Door Handle #348908
    colly
    Participant

    Re: Bosch WAS28466GB/08 w/m Door Handle

    Hi
    where is this cdsl company based?

    Any contact detail’s please?

    colly

    May 10, 2011 at 9:12 pm in reply to: lg WM-1080FHD washer bearings #351044
    colly
    Participant

    Re: lg WM-1080FHD washer bearings

    Hi keith
    I think alan has had one of these to bits for a bra wire .
    He said was quite easy .
    Connect do Lg spares but not cheap .
    colin

    May 5, 2011 at 9:29 pm in reply to: beko wm6123w not draining #350655
    colly
    Participant

    Re: beko wm6123w not draining

    New boards are cheap for these beko machines.

    They do fail quite often .
    Not had a no drain fault that was not a blockage or pump though .
    Could be carbons no motor action can cause no drain on these modern machines.

    Colly

    May 4, 2011 at 10:11 pm in reply to: BEKO WMA510W #350579
    colly
    Participant

    Re: BEKO WMA510W

    Hi
    Common fault on beko is motor brushes .
    I have had a one that would not cancel at all .
    I tapped the back of the motor a few times so as to make brushes make contact.
    I then found drum would rotate and i could now cancel the programme.
    New brushes fitted cured the problem.
    Worth a check
    Colly

    May 4, 2011 at 10:05 pm in reply to: Creda fan oven not heating up #350586
    colly
    Participant

    Re: Creda fan oven not heating up

    Hi
    Should be your element.
    Colly

  • Author
    Posts
Viewing 15 posts - 31 through 45 (of 83 total)
1 2 3 4 5 6