[Criscold]

Re: sgs6312 gb bosch d/w leak under pressure on gutter seal

Have you checked that the lower wash arm support hasn’t become uncliped from the arm and that the arm is not split. Either of these would cause water to come out under the door whilst under pressure

[Criscold]

Re: electrolux EMX14440W goes to pause on all programmes

have you got product number ?

[Criscold]

Re: AEG FRIDGE

YEP – 50292181000

[Criscold]

Re: AEG FRIDGE

Faulty temperature sensor ?

You Have Mail

[Criscold]

Re: warning- a cooker thats still on when its off.

I went to a machine a few years back, the machines all neatly lined up Washing Machine -Tumble Dryer-Dishwasher, they all had spur switches above marked with the appliance’s. Pulled out the Washing Machine after switching off, removed top and put hand inside and whack. customer then said he wondered why I had turned of the tumble dryer and then stated the plugs under the counter had been fitted into different sockets to save extending the machine cables.

[Criscold]

Re: Landline phone diverted to mobile???

I have a number with Sipgate, I have an IP phone number that I have on permanent divert to my mobile
the number and has area prefix of your choice this is free and I only pay for the forwarding. or they also do business packages starting with 3 numbers that you purchase and can also be diverted. Worth a look at.

http://www.sipgate.co.uk/user/

Colin

[Criscold]

Re: Zanussi TC7114W condenser dryer – noisy drum

It appears that this machine has roller supporting the front and would think these would be the most likely cause of the noise

Part Numbers are

Rear Bearing 1250134119
Shaft/Axle 1250232053

Front Roller 1254235003
Roller Bush 1254250002
Roller Screw 1240222123

Good Luck

Colin

[Criscold]

Re: AWG5122

Just a stab in the dark on this, I remember fitting brushes with single screw to a selini motor on a fagor WM
Model FU-1358 – Qualtex Pt No. QUACAR79

Colin

[Criscold]

Re: NEFF S5943X1GB/16 NO POWER !!

Have you checked that you are actually getting 240v at the socket or tried a different socket – also this machine has a connector for the door cables at the front of the base tray and these may be worth a check.

Colin

[Criscold]

Re: Flavel Diswasher DWFA20W

Beko have a machine under the same model number – if this is the same as the beko it lokks like it has a flow meter attached to the inlet water unit/airbreak on the LH side of the machine

Colin

[Criscold]

Re: Bosch WFO2864GB/01

Thanks Guys for your input, Just hoping for magic cure but suspect the board has gone. The machine is in a rented property and think it has been well used over the past 7 years. will have to see what owner wants to do but would think replacement machine.

Colin

[Criscold]

Re: Bosch WFO2864GB/01

Yes motor testing OK – both insulation & thru windings

[Criscold]

Re: Rangemaster 5344 110 green Electric

Looking at the timer on connect it looks like it has 2 relays – one either side of the timer, if this is the case it would just be a matter of connecting the wires together from each relay ie relay 1 remove cables and join them together & then the same for relay 2.

Colin

[Criscold]

Re: Beko WM 6152W

Yes no prob – let me have your email

[Criscold]

Re: Hygena APM6012 PCB and lampholder

Just Found This on espares
This part has changed and now only has 6 pins
This is Schrieber spares reference: 651015629
And this http://www.apart4u.co.uk/news/diagrams/ … sted-below

[Author]

Posts