Forum Replies Created
-
Posts
-
Re: Hygena APM6012 PCB and lampholder
Looks like they have them in stock here http://www.hygenadiplomatspares.co.uk
Re: AEG module’s – can they be re-programmed to a different
Should be able to on some of the older machines but depends on board fitted and would need product no to start with
Re: Zanussi ZWD14270w1
I agree with insulation fault on dryer heaters – had some strange faults on these machines as of late
Re: Works For 5-10mins Then Fault Occurs Zan ZWD12270W1
You say you have checked heater insulation – have you checked dryer heater as well as i’ve had some strange faults on these caused by dryer heaters ? and have you tried diagnostics
Re: Refrigeration Equipment Required
Lokring Pliers plus approx 50 connectors – open to offers
Re: Hotpoint BFI680 Hose clips
Bog Standard clips are 12mm – I have always used these on the whirlpool DW pumps and sump hose – perfect fit but never had to fit one onto a Hotpoint pump
Re: Hotpoint BFI680 Hose clips
Try Merlin Motor Sports – 9mm Wide made by Norma
http://www.merlinmotorsport.co.uk/AIR-D … index.htmlRe: Zanussi FL827 blocked air chamber
The only way is to remove the manifold and clear with hose – Do yourself a favor replace the complete manifold Pt No. 1240140614 – about £20-00 +
Re: aeg 64810 not completing cycle no error code
It sounds like motor tacho or wiring
Have you tried diagnostic mode ?Re: ZWF1221w
I had a ZWF1621 doing the same and changed most parts including control module, heater and pump the only major part not changed was the motor – never managed to correct fault as customer decided to replace machine. on the odd occasion I did manage to get fault code but was unlisted and can’t remember what it was now. I did wonder if it could have been a faulty overload in motor.
