[Dave_Conway]

Re: Dud Hygena/MFI fridge-freezer

There is no thermostat as such in this model as it is controlled electronically.

The £150 estimate you were given is correct as the control pcb is £118 inc VAT just for the part from MFI. The part however can be obtained from the manufacturer, Brandt for about £80 inc VAT.

That should give you some idea of possible costs, best to ask an engineer to attend though as we are only assuming that the pcb is at fault.

Dave.

[Dave_Conway]

Re: Tricity Bendix Oven Door Brackets Fell Off

Give us a ring on 01392 467889 (ask for Jess) she’ll sort it for you.

What do you present by the way ?

Dave.

[Dave_Conway]

Re: Smeg DW167 not heating error E3

Stealth wrote:Where in the door can I find it?

Steve, if you don’t know what a thermostat looks like or how to identify one then I would really suggest you call an engineer.

Dave.

[Dave_Conway]

Re: Smeg DW167 not heating error E3

The thermostat you have checked sounds like it’s working OK, there is another one in the door though.

The pcb for this model (as long as it’s not the DWI67.1 version) is £165.67 inc VAT.

I would suggest an engineer though, it could be an expensive misdiagnosis 😉

Dave.

[Dave_Conway]

Re: SMEG DWI 710E1

That’s an E7 fault on a five led pcb.

A straightforward reset should do the trick on this one:

With the door open, turn the appliance on and, within three seconds, push 4 times on the program
selection button – The test program has been selected if the SOAK and STRONG pilot lamps are
flashing. This LED combination represents the test program for appliances that have a flow meter.
If, after applying the reset procedure, the above indication is not shown on the display, switch the
ppliance off and commence the reset procedure again, from the beginning. a
Once the two outer LED’s are illuminated, as above, push on the program selection button once to
select the version “without flow meter” and check that the pilot lamp of the SOAK indicator is off, as
indicated below.
To complete the procedure, do not close the door, simply switch the appliance off. After a short
elay, 10 to 15 seconds, switch the appliance back on and test on a SOAK program.

Appologies for the translation 😉

Dave.

[Dave_Conway]

Re: Zanussi upright freezer not working

I’d have to agree with Penguin’s prognosis on that one, compressor by the sound of it.

Generally a compressor change wil cost in the region of £200 all in, given it’s age, probably not worth repairing frankly.

Dave.

[Dave_Conway]

Re: Indesit WE 16 UK Door Seal replacement

andrewk wrote:The listing of machines in Shop@ suitable for fitting with C00064545 does not yet include the “WE 16 UK” variant.

Sorry, I hurriedly copied it over from a database I have, WE16 is now on the list, thanks for pointing it out.

Dave.

[Dave_Conway]

Re: Indesit WE 16 UK Door Seal replacement

Martin wrote:It may well be available via our “shop@” site in the navigation bar

It is now 😉

Here : http://shop.ukwhitegoods.co.uk/c0006454 … -door-seal

Dave.

[Dave_Conway]

Re: Zanussi WDT 1275 Motor

Probably glued in then, I had a look at a new motor here and it doesn’t have the clip either.

Dave.

[Dave_Conway]

Re: UK Whitegoods Meeting 4 – Feb 05

As there seems to be no problem with the date we’ll take is as confirmed 😀

Anyone like to make suggestions for invitees ?

We already have a few planned, but if there’s any suggestions, please make them known here.

Thanks.

Dave.

[Dave_Conway]

Re: Necht Dishwasher

Shanz, can you post the model and serial numbers please.

Necht don’t actually manufacture these appliances, they are rebadged.

Regards.

Dave.

[Dave_Conway]

Re: Hygena oven – fixing and finding parts

Wow – thanks very much for looking this up for me.

You’re right – it’s an APL 3227, not 3223 – no idea how I got that wrong.

Thank you

Tim

Sorry Tim, youre double post got deleted so i’ve quoted above.

Anyway, the fan element is £35.21 inc VAT and postage.

Let me know by email if you want one ordered/sent and i’ll arrange for you.

Dave.

[Dave_Conway]

Re: Homark ceramic hob

Tom Liddell wrote:Dave
Sent you an e-mail – do not know if you received it as our system playing up.

Yep, I got it OK, replied 😉

Dave.

[Dave_Conway]

Re: Hoover TV630 Tumble Dryer

The heater assembly is £35 inc VAT plus £3.50 postage.

You can get one from the shop here:

http://shop.ukwhitegoods.co.uk/40004314 … ng-element

Dave.

[Dave_Conway]

Re: Homark Oven Door Handle

Hi Lesley.

The door handle is £39 inc VAT and carriage, available from the manufacturers Brant, normally 3-5 working days so you’ll be OK for the December deadline 😉

If you want one ordered and sent drop me an email.

Dave.

[Author]

Posts