Forum Replies Created
-
Posts
-
Re: Beko WMA 765W
Hi Ray,
Is there any chance you could be a bit more specific about the exact problems the machine is causing and on what programes, as it’s just being ‘Silly’ is a little vauge to say the least.
Sean
Re: beko wma 510 needs reset????
Try turning the machine off via the ON/OFF button and wait for a few minutes untill you hear a soft audible click which means that the door lock has released.
Next (with the door still closed)set the programe selector to Drain, turn the machine on again via the ON/OFF button, then press and hold the start/pause/cancell button untill you hear the pump start, then release the start /pause/ cancel button.
Allow the machine to complete the drain function without interuption. The machine then stops and after a couple of minutes the door lock should release.Your machine should then have reset itself and be ready for normal use.
HTH
Sean
Re: Sudbury to the Sea
iadom wrote:I’ll match Chris’s kind offer, see you at Sibson. 8)
Jim.
Ditto
Sean
Re: Bendix BIW 102
johnnydiscus wrote:
The m/c seems to work fine so I am not about to start putting shorting links anywhere that they are not supposed to go. Has anyone any idea of where it has come from or where I can get a wiring diagram for the beast.
CheersHi,
As the old saying goes if it aint broke then dont fix it. Sometimes machines have several model variants, you will probably find that on other machines similar to yours there might be additional option buttons which most people dont bother with anyway.
The best expert as to how your machine is working is your good lady. If she says its working o.k. then trust her judgement.
Just as a safeguard put the connector that you found away in a safe place just in case.
Re: Why ?
kwatt wrote:
I can tell you it works well with rum, Jack Daniels and assorted other libations as many a visitor will testify after their recovery is complete. 😉
K.And you said you wouldn’t tell 😯
Sean
Re: September 2007 Meeting
It’ll be nice to meet a movie star. We’ve only ever seen you on film Toni !
re the detergent training 😆Sean
Re: Evolution
You know there is always some bugger wanting to throw a spanner in the works.
At the risk of upsetting Ken and yourselves I think I’ve got to point a few things out.It is my considered opinion that we should delay setting up the WTA until we inform all the trade that we are about to launch it, not just those who either use or have access to the web.
I am just as convinced as the rest of you that DASA is dead, nobody is more qualified than myself to make such a statement having done my utmost to try to get it to work for the last seven years as a member of its council.
If we start this thing off by appointing one another on the ruling committee then we will be accused (and rightly so) of it being another arm of UKW with all of it’s legitimacy blown before it is even born.
DASA has always been accused of operating cloak and dagger tactics with secret hand shakes and private phone calls and here we are about to fall into the same trap.
Ken if you want to spend the subscribers money on something really useful then use it to mail shot every Indie in the land and tell them what we are trying to do and what we are trying to create. Do this by calling them to democratically structured open national meeting and address the attendees.
I am sure that Chris’s 10{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} rule will apply to the responses we get, probably not even that many. By doing it completely open and transparently, you will give the fledgling T.A. a clean and honest start of life.
Not only is this the correct way to go about this so that there will be no finger pointing afterwards but you will almost certainly encourage more of our trade to connect to the web as an easier means of communicating between members.
Have no fear that the right people will be voted to get the job done the vast majority of those in attendance will be UKW members who are already aware of who have done most to assist their fellow tradesmen.
There are some among us who have more to loose than their own livelihoods, they are responsible for others too. Let’s face it we have rattled the cages of enough manufacturers and work providers to make ourselves unpopular.
If we want the multi engineer members to be able to take full part and to be seen as members of this new T.A. then it has to be created from a process that is beyond reproach. It cannot then be accused of being a puppet organisation of UKW.
The guy’s in here that have given of their time and efforts over recent years, to help members of the white goods trade community have already demonstrated their commitment and would stand in good stead if It came to any open vote.
What I’m basically saying is have a little more faith in democracy. It’s often slower, but infinitely more palatable than all the other alternative options.
Sean
Re: Evolution
I was talking to Jackal only last night and he intimated to me that whilst he intends to back the WTA to the hilt, It is his wish to remain low profile.
If you can get him to change his mind no one would be more pleased than myself but I dont think you will.
Hope I’m wrong !
Sean
Re: Favourite song titles
Here’s a few country classics that have apparently, actually been recorded
1. Get Your Biscuits In The Oven And Your Buns In Bed
2. Get Your Tongue Otta My Mouth ‘Cause I’m Kissing You Goodbye
3. Her Teeth Was Stained, But Her Heart Was Pure
4. How Can I Miss You If You Won’t Go Away?
5. I Can’t Get Over You, So Why Don’t You Get Under Me
6. I Don’t Know Whether To Kill Myself Or Go Bowling
7. I Got In At 2 With a 10, And Woke Up At 10 With a 2.
8. I Hate Every Bone In Your Body Except For Mine
9. I Just Bought A Car From A Guy That Stole My Girl, But The Car
Don’t Run, So I figure We Got An Even Deal
10. I Keep Forgettin’ I Forgot About You
11. I Liked You Better Before I Knew You So Well
12. I Still Miss You Baby, But My Aim’s Gettin’ Better
13. I Wouldn’t Take Her To A Dog Fight, Cause I’m Afraid She’d Win
14. I’ll Marry You Tomorrow But Let’s Honeymoon Tonight
15. I’m So miserable Without You, It’s Like Having You Here
16. I’ve Got Tears in My Ears From Lying On My Back While I Cry Over you
17. If I Can’t Be Number One In Your Life, Then Number Two On You
18. If I Had Shot You When I Wanted To, I’d Be Out By Now
19. Mama Get A Hammer (There’s A Fly On Papa’s Head)
20. My Head Hurts, My Feet Stink, And I Love Rovers
21. My Wife Ran Off With My Best Friend, and I Sure Do Miss Him
22. Please Bypass this Heart
23. She Got The Ring and I Got The Finger
24. You’re the Reason Our Kids Are So UglyRe: Is there nothing going on?
They’ve all buggered off on holiday Alex.
I’m sure there’ll be a new brood of boy wonder bean counters about to join manufacturers and inform us all of how to get a quart out of a pint pot. 😉
Sean
Re: Names
Martin have no fear, if there’s one thing I know for an absolute fact, its that Ken knows how to delegate. I dont think there is a county left in the whole UK that I havn’t been to or passed through on one of his assignments.
Dave Conways house is beginning to look more like an industrial estate than a residential property. If anyone needs info or parts the guy is practically open all hours.
Even your own kitchen was used as a test lab for the first ISE which you did a crackin’ job on re-writing the ‘USER MANNUAL’ for.
Remember we know the bugger, some of our new voulenteers don’t. The only thing Ken needs from people is to ‘Say what they mean’ and ‘Mean what they say’.
The rest is just logistics.Sean
kwatt wrote:Two words for you Davie… Kenwood + dishwasher. 😉
K.
Sometimes it pays to keep shtum 😆
By the way welcome to Madmac 😉 Like we needed another looney tune from north of the border. They’ll be runnin’ the bloody site next 😆
Sean
