Forum Replies Created
-
Posts
-
Re: fisher paykell / whirlpool double door dishwasher
Hiya,
It should be showing an error code. Either by flashing lights or numbers if it has a numerical display.
Model number would be handy too.
BrianRe: Whirpool ADP 4400 dishwasher
Hiya,
Check to see which circulation pump is fitted. I’d guess it’s the Askoll and it’s guffed.
Not sure about the pcb dying, could be a leak too, spraying water.Brian
Re: Whirlpool double door S20BRSB21 / AG
Hiya,
Normally it’s the rear pcb. However, from the 85 number it looks as though you’ll have to replace both.
Check the serial number. 11 will be the factory, next 2 numbers are the year, next 2 the week.
If it’s 110330 or earlier you have to change both boards.Brian
Re: Diplomat ADP8322
Don’t forget……………….. door lock turned over and machine thinks the door is closed.
Brian
Re: Whirpool ARG4AA
Hiya,
Nearest to your model number is ARG488/G.
Ice maker doesn’t appear to come as a complete unit.
You’ve got mail.Brian
Re: Diplomat ADP8322
Hiya,
6 flashes is normally the flow meter. Bad connection is the favourite, unplug it, clean pcb, tighten plug, plug back on and it should work.
Complete metering tank if you want to change the flowmeter.Brian
Re: Sharp R84ST Microwave
Hi Merv,
Got that thanks.
Hopefully I can suss out why it won’t let me set the time and why it’s displaying sensor 1.Ta
Brian 😀Re: ZANUSSI ZWD1471S
If there’s no water coming in then the fan shouldn’t run and the heater shouldn’t come on. However, again, it should register an error code.
Re: Whirlpool F/F RS533Ag
Hiya,
Can’t find anything with that model number I’m afraid. Serial certainly looks like Whirlpool.Brian 😕
Re: ZANUSSI ZWD1471S
Hiya,
If there’s water coming in I’d be guessing at the dryer NTC in the condenser hose, although it should bring up an error code.Brian
Re: Hotpoint Aqualtis
Hiya Phil,
Do you not have UKWhitegoods Fault Code Book? Cause the fault codes are in there..
Well worth the money although you might want to wait for the rewrite or episode 2 😛Same codes as Hotpoint Ultima range, EVO 2 software.
Brian
Re: Servis M6011-1
Hiya,
Email on it’s way to you now. Should sort out the problem for you.
Brian 😀
Re: Diplomat Dishwasher ADP8322 six flashes on led?
Hiya,
It’s a Whirlpool. Codes are in the stickies.
However, favourite is the flowmeter. Unplug the flowmeter, clean the contacts, tighten the plug, plug it back on and try again.Brian
Re: whirlpool S20BRBB20 858615215000 not freezing
Hiya,
If you’ve determined that the board is at fault you’ll need to check the serial number to tell if it requires just the rear board or both. If the first six numbers of the serial are less than or equal to 110330 you’ll need both boards, after this you only need the rear board.Brian
