Forum Replies Created
-
Posts
-
Re: SMEG WASHING DRYER NOT WORKING MODEL NUMBER WDI12
doing nothing? no lights? then start at the on off swtich.
if nothing obvious, check the brushes first can account for a dead machine on these.Re: AW23 trade cost?
would be nice to get a reply from the horses mouth, no offence Don. I am still waiting on a reply regarding the 5 year warranty.
Re: Indesit INE160G changeable door seal ?
adv wrote:dont do them anymore a factory fit afraid 😆
oddly for this one though, the door complete is shown as POA?
Re: hotpoint bf12
its a Fagor made one if thats any help, wouldnt know a cross ref part number though. sure its the problem? never recall ever changing one.
Re: Indesit INE160G changeable door seal ?
is shown as a spare part……I have a general rule, no screws no change. that is a lesson learnt after some right cowboy looking jobs cutting out the old one as instructed by some nameless manufacturers.
Re: SMEG OVEN MODEL SE20X MFR5
now sent it to you twice, has not bounced back. maybe you cannot accept atatchments?
try and download it here instead:
https://acrobat.com/#d=c0Fb2KMX9ALa6sbtTWbsRw
ps. no need to start another thread on the same subject.Re: SMEG OVEN MODEL SE20X MFR5
just re sent, not bounced back, maybe check you mail address is correct on UKW?
Re: miele w 806
drainage tube?
you mean on the filter? then no bung, the filter is not in tight enough or a seal problem with the filter, they are nasty things to get right.
Re: Brandt WFH 1371 w/m tripping out
assuming its not the heater, take the main pcb out of its box and look for blown track, if blown suspect door interlock damaged by water leak from blocked syphon tube in dispenser. Whatever you do, dont just fit a pcb without finding reason for it blowing first.
Good ol machines these and the customers love them, worth repairing.nomadPaul wrote:The hose at the very bottom of the door seal is just a drain hole into the drum , it isn’t the pressure hose . The pressure hose goes into a seperate hole/seal in the front drum plate , behind the weight , if i remember correctly .
yes, think we all know the diffrerence there thanks.
Re: Neff V5340X0GB/03 pressure chamber
not saying you cannot remove the wieght, just a warning not to do so unless absolutely nessesary and warn the customer first that if ift should break then they need to pay for a new one!
Re: Neff V5340X0GB/03 pressure chamber
lovely things, SMEG built. Best method is to use a syringe and force some hot water down the pressure pipe while squeezing what you can see of the airbell between tub front and wieght, usually does the trick.
Dont be tempted to remove the weight for 2 reasons, 1) it will almost certainly already be cracked and removal will finish it off and 2) even it you do remove it, the air bell is fitted from inside the tub so is virtualy impossible to get back in if you m anage to get it out as the part inside is a big hard lump of rubber.
